Panasonic KX-TGP600G Operating Instructions Manual Download Page 48

Page: 48 / 132

Operation Outline

Screen Transition Diagram

Handset/Desk Phone functions are accessed through the display menu and selected with the soft keys.

[Example] (KX-TPA60/KX-TPA65)

LINE

FUNC

MENU

*1 The Line Status screen is different depending on whether connected to a KX-TGP600 or another

base unit. For details, see “LINE Key”, Page 46.

/[FUNCTION] for the KX-TPA65.

*3 The Function Keys screen is different depending on whether connected to a KX-TGP600 or another

base unit. For details, see “Function Keys (KX-TPA60/KX-TPA65)”, Page 50.

The selected item will be highlighted.

To enter characters, see “Character Mode Table”, Page 103.

To search for an item in the Phonebook, see “Using the Phonebook”, Page 73.

Before Operating the Telephones

Summary of Contents for KX-TGP600G





































































































































Search results

Summary of Contents for KX-TGP600G

Reviews:

Related manuals for KX-TGP600G

Brands by name

Popular brands

Panasonic KX-TGP600G, Operating Instructions Manual

Search results

Summary of Contents for KX-TGP600G

Reviews:

Related manuals for KX-TGP600G

Brands by name

Popular brands