Controls
12
Red
On
L
When the base unit is turned on, the
4
indicator lights
in red for about 10 seconds.
Flashing
L
The base unit is registering a handset.
Flashing
rapidly
L
The base unit is paging handsets. (KX-TGP500 only)
Amber
On
L
The base unit’s IP address may conflict with the IP
addresses of other devices on your local network.
Contact your administrator for further information.
Flashing
L
The base unit is obtaining an IP address or is obtaining
configurations. Please wait.
L
The base unit is registering with your service provider.
Please wait.
L
If the
4
indicator continues flashing, check the
following:
– Network settings may not be correct. Contact your
administrator.
– Many installation issues can be resolved by
resetting all the equipment. First, shut down your
modem, router, hub, base unit, and computer. Then
turn the devices back on one at a time in this order:
modem, router, hub, base unit, computer.
– If you cannot access Internet Web pages using your
computer, check to see if your Internet service
provider is having connection issues in your area.
– For more troubleshooting help, contact your
administrator.
Flashing
rapidly
L
Unplug the base unit’s AC adaptor to reset the unit,
then reconnect the AC adaptor. If the
4
indicator is
still flashing rapidly, there may be a problem with the
base unit hardware. Contact your service provider.
Off
—
L
The base unit power is off.
L
The Ethernet cable is not connected properly. Connect
it.
L
Your network devices (hub, router, etc.) are turned off.
Check the LEDs for the link status of the devices.
L
The base unit power is booting up.
Status
Meaning
Colour
Light
pattern
