Panasonic KX-TGM460, Operating Instructions Manual

Page: 60 / 104

Sub-menu 1 Sub-menu 2 Settings Code
Call sharing
*1 – < On >
Off
#194 42
Registration Register handset – #130 63
Deregistration
*2 – #131 63
Headset type – < Headset >
Neckloop
with Mic
Neckloop w/
o Mic
#786 34
Change language Display <
English
>
Español
#110 23
Announcement
*1 <
English
>
Español
#112 23
Main menu: “
Customer support
”
Operation Code
Displaying customer support Web address. #680 –
Main menu: “
Key detector
” *12
Sub-menu 1 Sub-menu 2 Settings Code
Search – – #655 –
Battery check – –
*1 If you program these settings using one of the units, you do not need to program the same
item using another unit.
*2 This menu is not displayed when scrolling through the display menus. It is only available in
direct command code.
*3 When the cellular line only mode is turned on, these menus are not displayed (page 37).
*4 After the Bluetooth device is paired, the device name is displayed.
*5 For CELL 1
*6 For CELL 2
*7 The preset ringers in this product (
“ Ringer 6 ” - “ Ringer 15 ” ) are used with permission
of © 2004 - 2013 Copyrights Vision Inc.
*8 If you subscribe to a distinctive ring service (such as IDENTA-RING), select one of the
ringers ( “
Ringer 1
” to “
Ringer 5
” ).
*9 If you select one of the ringers ( “
Ringer 1
” to “
Ringer 5
” ), select the desired frequency
( “
Frequency 1
” to “
Frequency 6
” ).
*10 This feature allows the unit to automatically adjust the date and time each time caller
information including date and time is received.
To turn this feature on, select
“
Caller ID auto
” . To turn this feature off, select
“
Manual
” . (Caller ID subscribers only)
To use this feature, set the date and time first (page 24).
*11 This tone lets you know when you receive an outside call while you are on another line or an
intercom call. If you select “ On ” , the tone sounds 2 times.
60 For assistance, please visit http://shop.panasonic.com/support
Programming