Panasonic KX-TGM460, Operating Instructions Manual

Page: 65 / 104

3
To call back, press M SELECT N .
To exit, press M OFF N .
4
M CELL N
R The unit starts dialing immediately
in the following situations.
– Only 1 cellular phone is paired.
– A specific line is set to make
cellular calls (page 38).
5
MbN : Select the desired cellular phone.
a M SELECT N
n Using a landline
1
MCN CID
2
Press MCN to search from the most
recent call, or MDN to search from the
oldest call.
3
To call back, press M TALK N .
To exit, press M OFF N .
Note:
R If the entry has already been viewed or
answered, “
” is displayed.
R or indicates the caller information
was received from the cellular line.
Editing a caller’s phone
number
You can edit a phone number in the caller list
by removing its area code and/or the long
distance code “1”.
n When a cellular phone is paired:
1
MCN CID
2
MbN : Select the desired entry. a
M SELECT N
3
Press * (Edit) repeatedly until the
phone number is shown in the desired
format.
4
Using a cellular line:
To make a cellular call, continue from
step 4, “Viewing the caller list and
calling back”, page 64.
Using a landline:
M TALK N
n When a cellular phone is not paired:
1
MCN CID
2
MbN : Select the desired entry. a
M MENU N
3
MbN : “
Edit
” a M SELECT N
4
Press M EDIT N repeatedly until the
phone number is shown in the desired
format.
5
M TALK N
Caller ID number auto edit
feature
Once you call back an edited number, the unit
which was used to call back remembers the
area code and format of the edited number.
The next time someone calls from the same
area code, caller information is customized by
the unit as follows:
– When the call is being received, the Caller
ID number is displayed in the same format
as the edited number.
– After the call has ended, the caller’s phone
number is displayed in the same format as
the edited number, when reviewed from the
caller list.
For example, you can use this feature to set
the unit to ignore the area code of callers in
your area, so that you can call these local
numbers using caller information without
dialing the area code.
To activate this feature, you must edit an entry
in the caller list, then call that number. After
that, phone numbers from that caller’s area
code are edited automatically.
This feature can be set for each unit
(page 59). The default setting is
“ On ” .
Note:
R Phone numbers from the 4 most recently
edited area codes are automatically edited.
Erasing selected caller
information
1
MCN CID
2
MbN : Select the desired entry.
3
M ERASE N a MbN : “
Yes
” a M SELECT N
a M OFF N
For assistance, please visit http://shop.panasonic.com/support 65
Caller ID Service