n
While another unit is on a landline call:
To join the conversation, press
M
TALK
N
.
Base unit
To join the conversation, select the line that is
being used for the call:
– for a cellular line press
M
CELL 1
N
or
M
CELL
2
N
.
– for the landline press
MZN
.
Note for handset and base unit:
R
A maximum of 3 parties (including 1 outside
party) can join a conversation using 2
extensions.
(3-way conference)
R
To prevent other users from joining your
conversations with outside callers, turn call
sharing mode off (page 59).
Transferring calls,
conference calls
Outside calls can be transferred or a
conference call
made:
– between 2 handsets
– between a handset and the base unit
*1 A conference call can be established
using the handset only.
Handset
1
During an outside call, press
M
MENU
N
.
2
MbN
:
“
Intercom
”
a
M
SELECT
N
3
MbN
: Select the desired unit.
a
M
SELECT
N
R
If you select
“
Voice paging
”
, the
call will be switched from the
ear-receiver mode to the
speakerphone mode.
4
Wait for the paged party to answer.
R
If the paged party does not answer,
press
M
BACK
N
to return to the outside
call.
5
To complete the transfer:
Press
M
OFF
N
.
To establish a conference call:
M
MENU
N
a
MbN
:
“
Conference
”
a
M
SELECT
N
R
To leave the conference, press
M
OFF
N
.
The other 2 parties can continue the
conversation.
R
To put the outside call on hold:
M
MENU
N
a
MbN
:
“
Hold
”
a
M
SELECT
N
To resume the conference:
M
MENU
N
a
MbN
:
“
Conference
”
a
M
SELECT
N
R
To cancel the conference:
M
MENU
N
a
MbN
:
“
Stop conference
”
a
M
SELECT
N
You can continue the conversation
with the outside caller.
Base unit
1
During an outside call, press
M
LOCATOR/
INTERCOM
N
.
R
All registered handsets ring.
R
The outside call is put on hold.
2
Wait for the paged party to answer.
R
If the paged party does not answer,
press
M
LOCATOR/INTERCOM
N
to
return to the outside call.
3
To complete the transfer, press
MZN
.
R
The outside call is being routed to the
handset.
Transferring a cellular call
between the unit and a
cellular phone
n
From the handset to a cellular phone
1
Press
M
MENU
N
during a cellular call.
2
MbN
:
“
Transfer to cell
”
a
M
SELECT
N
R
The cellular call is transferred to the
cellular phone.
Note:
R
Depending on your cellular phone type,
you may need to set the cellular phone
to be ready to talk before transferring.
For example, if your cellular phone has a
top cover, open it beforehand.
n
From a cellular phone to the handset
During a conversation using a cellular
phone, the call cannot be transferred to the
handset by the cellular phone. Perform the
following with the handset.
42
For assistance, please visit http://shop.panasonic.com/support
Making/Answering Calls
TGM43x(en)_0426_ver031.pdf 42
2016/04/26 10:55:18
