Panasonic KX-TGM430, Operating Instructions Manual

Page: 69 / 112

2
MbN : Select the desired setting. a
M SAVE N a M OFF N
Selecting the alert tone
1
For CELL 1: M MENU N#6041
For CELL 2: M MENU N#6042
2
MbN : Select the desired setting. a
M SAVE N a M OFF N
Using a Bluetooth
headset (optional)
By pairing a Bluetooth headset to the base
unit, you can enjoy hands-free conversations
when talking on landline calls.
Important:
R Your Bluetooth headset must support the
Headset Profile (HSP) specification.
R Only 1 Bluetooth headset can be paired to
the base unit.
R Only 2 Bluetooth devices can be used with
the unit at the same time (for example, 2
cellular lines, or the headset and 1 cellular
line
*1 ).
R For best performance, we recommend
using your Bluetooth headset within 1 m
(3.3 feet) of the base unit. The base unit
can communicate with Bluetooth headsets
within a approximately 10 m (33 feet) range.
*1 You cannot use a Bluetooth headset to
talk on a cellular line.
Pairing a Bluetooth
headset to the base unit
Important:
R Make sure that the Bluetooth headset is not
connected to any other Bluetooth device.
1
Bluetooth headset:
Set your headset to pairing mode.
R Refer to your headset’s operating
instructions.
2
Handset:
M MENU N#621
3
If your headset’s PIN is “
0000
”, go to
step 4.
If your headset’s PIN is not “
0000
”,
press M CLEAR N , then enter your
headset’s PIN.
R Typically, the default PIN is “
0000
” .
Refer to the headset’s operating
instructions.
4
Press M OK N , then wait until a long beep
sounds.
5
M OFF N
R When the Bluetooth headset is ready
for use:
–
is displayed on the handset (H:
Bluetooth headset),
– the CELL 2/HEADSET indicator on
the base unit lights up.
Connecting/disconnecting a
Bluetooth headset
If you cannot connect the headset and base
unit using the headset, you can connect using
the handset.
To use your headset with another Bluetooth
device such as a cellular phone, you may
need to disconnect it from the base unit.
Important:
R Make sure that the headset is turned on.
1
To connect/disconnect:
M MENU N#622
R A long beep sounds.
2
M OFF N
Unpairing a Bluetooth headset
You can cancel a pairing of the headset that is
stored to the base unit.
1
M MENU N#612
2
MbN : “
Yes
” a M SELECT N
R When the headset is unpaired,
disappears on the handset.
3
M OFF N
For assistance, please visit http://shop.panasonic.com/support 69
Using Bluetooth® Devices
TGM43x(en)_0426_ver031.pdf 69 2016/04/26 10:55:19