*2 This menu is not displayed when scrolling through the display menus. It is only available in
direct command code.
*3 This feature allows the unit to automatically adjust the date and time each time caller
information including date and time is received.
To turn this feature on, select
“
Caller ID
”
. To turn this feature off, select
“
Manual
”
.
(Caller ID subscribers only)
To use this feature, set the date and time first (page 13).
*4 The preset melodies in this product are used with the following permission:
–
“
Ringtone 3
”
: © 2014 Copyrights Vision Inc.
–
“
Ringtone 4
”
-
“
Ringtone 40
”
: © 2012 Copyrights Vision Inc.
*5 If you do not want the unit to ring before the caller information is received, set to
“
Off
”
.
(Caller ID subscribers only)
You can only remove the first ring if the unit rings 2 times or more by default, which depends
on your phone service provider.
*6 This setting is available when you have the key finder (KX-TGA20AZ). Read the installation
manual for more information on the key finder.
*7 For models with supplied key finders, the display shows
“
1:Finder1
”
.
*8 If you register 2 or more key finders.
*9 This menu is not displayed when repeater mode is set to
“
On
”
.
*10 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up
the handset to answer a call, turn off this feature.
*11 The recall/flash time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary.
You can access your phone service provider “call waiting” service by having the recall/flash
time set at
“
100 msec.
”
, and then follow your phone service provider “call waiting”
instructions to operate this service. (for Australia)
*12 The default setting will be as follows if you select the following regional codes when
changing the unit’s region setting (page 32):
“
NewZealand
”
=
“
600 msec.
”
*13 To prevent other users from joining your conversations with outside callers, turn this feature
on.
*14 This menu icon is displayed when the key finder is not registered.
Alarm
An alarm sounds at the set time for 1 minute
and is repeated 5 times at 5 minute intervals
(snooze function). A text memo can also be
displayed for the alarm. A total of 3 separate
alarm times can be programmed for each
handset. You can set one of 3 different alarm
options (once, daily, or weekly) for each alarm
time.
Important:
R
Make sure the unit’s date and time setting
is correct (page 13).
1
M
MENU
N#720
2
MbN
: Select the desired alarm.
a
M
OK
N
3
MbN
: Select the desired alarm option.
a
M
OK
N
“
Off
”
Turns alarm off. Go to step 9.
“
Once
”
An alarm sounds once at the set time.
“
Daily
”
An alarm sounds daily at the set time.
Go to step 5.
“
Weekly
”
Alarm sounds weekly at the set time(s).
26
Programming
KX-TGK320AZ_(en-en)_0908_ver001.pdf 26
9/8/2015 11:08:27 AM
