Main menu:
“
Nuisance Call Block
”
Sub-menu 1
Sub-menu 2
Settings
Code
Single Number
–
–
#217
Range of Numbers
–
–
Withheld
–
On
<
Off
>
#240
Main menu:
“
Speed Dial
”
Operation
Code
Viewing the speed dial entry.
#261
*1 If you program these settings using one of the handsets, you do not need to program the
same item using another handset.
*2 This feature allows the unit to automatically adjust the date and time each time caller
information including date and time is received.
To turn this feature on, select
“
Caller ID
”
. To turn this feature off, select
“
Manual
”
.
(Caller ID subscribers only)
To use this feature, set the date and time first (page 12).
*3 The preset melodies in this product (
“
Ringtone 3
”
-
“
Ringtone 40
”
) are used with
permission of © 2012 - 2017 Copyrights Vision Inc.
*4 If you do not want the unit to ring before the caller information is received, set to
“
Off
”
.
(Caller ID subscribers only)
You can only remove the first ring if the unit rings 2 times or more by default, which depends
on your phone service provider.
*5 This menu is not displayed when repeater mode is set to
“
On
”
.
*6 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up
the handset to answer a call, turn off this feature.
*7 The recall/flash time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary.
*8 To prevent other users from joining your conversations with outside callers, turn this feature
on.
*9 This menu is not displayed when scrolling through the display menus. It is only available in
direct command code.
22
Programming
