Intercom
Intercom calls can be made:
– between handsets
– between a handset and the base unit
Note:
R
When paging unit(s), the paged unit(s)
beeps for 1 minute.
R
If you receive an outside call while talking
on the intercom, the interrupt tone sounds
(page 56, 60).
–
Handset:
To finish intercom, press
M
OFF
N
. To answer the call, press
M
N
or
M
CELL
N
.
–
Base unit:
To finish intercom, press
M
SP-PHONE
N
. To answer the call, press
M
SP-PHONE
N
again or the
corresponding cellular line key (
M
CELL
1
N
or
M
CELL 2
N
).
R
To change the handset ringer volume and
ringer tone for intercom, see page 56.
Making an intercom call
Handset
1
M
MENU
N
a
MbN
:
“
Intercom
”
a
M
SELECT
N
2
MbN
: Select the desired unit or
“
Voice
paging
”
.
a
M
SELECT
N
R
If you select
“
Voice paging
”
, speak
into the microphone after the beep.
Your voice will be heard using the
speakers of the base unit and all
handsets, until a paged party answers
your page or until you press
M
OFF
N
.
After the other party answers, the
speakerphone mode is turned on.
3
When you finish talking, press
M
OFF
N
.
Note:
R
You can also use the
M
INTERCOM
N
soft
key, if displayed, to make intercom calls.
R
You cannot use voice paging if other units
are in use.
Base unit
1
Press
M
INTERCOM
N
.
When 2 or more handsets are
registered:
– To page a specific handset, enter the
handset number.
– To page all handsets, press
0
or wait
for a few seconds.
2
When you finish talking, press
M
SP-PHONE
N
.
Answering an intercom call
Handset
1
Press
M
N
to answer the page.
2
When you finish talking, press
M
OFF
N
.
Base unit
1
Press
M
SP-PHONE
N
to answer the page.
2
When you finish talking, press
M
SP-PHONE
N
.
Turning auto intercom on/off
This feature allows the handset or base unit to
answer intercom calls automatically when it is
called. You do not need to press
M
N
on the
handset or
M
SP-PHONE
N
on the base unit.
When this feature is set to
“
On
”
, the
monitoring handset or base unit for the baby
monitor feature (page 65) will also answer
baby monitor calls automatically. The default
setting is
“
Off
”
.
Handset / Base unit
1
M
MENU
N#273
2
MbN
: Select the desired setting.
a
M
SAVE
N
3
Proceed with the operation for your unit
Handset:
M
OFF
N
Base unit:
M
EXIT
N
Note:
R
This feature is not available for all handsets
paging and voice paging even if it is turned
on.
For assistance, please visit http://shop.panasonic.com/support
37
Intercom
KX-TGF97xUSA(en-us)_0928_ver121.pdf 37
9/28/2022 11:24:40 AM
