Panasonic KX-TGF943, Operating Instructions Manual

Page: 31 / 80

– pre-recorded greeting message
Recording a greeting message for
automated call block
Using this feature, the unit can play your own
greeting message and pre-recorded greeting
message.
Example of your own greeting message:
“Hi, you have reached xxxxxxx (Name).”
“Thank you for your calling, You have reached
xxxxxxx (Name).”
“Hi, you have reached the xxxx (Name)
residence.”
1
M MENU N#791
2
MbN : “
Yes
” a M SELECT N
3
After a beep sounds, hold the handset
about 20 cm (8 inches) away and speak
clearly into the microphone (2 minutes
max.).
4
Press M STOP N to stop recording.
5
The unit will play the recorded greeting
message for automated call block.
a
M OFF N
Resetting to the pre-recorded
greeting message for automated call
block
This procedure will erase your greeting
message for automated call block and reset to
the pre-recorded one.
1
M MENU N#793
2
M YES N a M OFF N
Playing back the greeting message
for automated call block
1
M MENU N#792
2
To exit, press M OFF N .
Telemarketing call block
In addition to Automated call block (page 29),
you can use Telemarketing call block to
further screen calls to stop telemarketer calls
from getting through.
Using this feature, you can ask callers to say
their names, and after checking the names,
you can decide whether to answer the calls or
not.
Note:
R While screening calls, the call waiting
feature is unavailable (page 19).
Operating telemarketing call
block
Handset
1
During an outside call, lift the handset
and then press
M TELE.BLK. N .
R The unit prompts callers to say their
names.
2
To answer the call:
Press M N or MZN .
To block the call:
Press M CALL BLOCK N *1 a M YES N .
R The unit announces that the call will be
disconnected, and disconnects the call.
R The caller will be registered to call
block list.
*1 The user can still answer the call after
pressing M CALL BLOCK N . To answer the
call, press M N or MZN .
Base unit
1
Press M TELE.BLK. N during an outside
call.
R The unit prompts callers to say their
names.
2
To answer the call:
Press M SP-PHONE N .
To block the call:
Press M CALL BLOCK N *1 a M YES N .
R The unit announces that the call will be
disconnected, and disconnects the call.
R The caller will be registered to call
block list.
*1 The user can still answer the call after
pressing M CALL BLOCK N . To answer the
call, press M SP-PHONE N .
For assistance, please visit http://shop.panasonic.com/support 31
Enhanced Call Block
TGF94x(en)_1007_ver014.pdf 31 2022/10/07 15:47:30