Panasonic KX-TGF743, Operating Instructions Manual

Page: 45 / 76

Baby monitor sensitivity
You can adjust the sensitivity of the baby
monitor. Increase or decrease the sensitivity to
adjust the sound level needed to trigger the
baby monitor feature.
R This feature cannot be set during a
monitoring call.
Handset
1
Press M MENU N on the handset being
monitored.
2
MbN : “
Sensitivity level
” a
M SELECT N
3
MbN : Select the desired setting. a
M SAVE N a M OFF N
Answering the baby monitor
n When monitoring with a unit:
Handset:
Press M N to answer a call.
Base unit: Press M N to answer a call.
If you want to respond from the monitoring
unit, press
M MUTE N .
R The monitoring unit will answer calls
automatically when the auto intercom
feature is set to
“ On ” (page 20).
Note:
R If you receive an outside call when
communicating with the monitored handset,
the interrupt tone sounds.
– To answer the call with the handset,
press M OFF N , then press M N .
– To answer the call with the base unit,
press MZN 3 times.
*1
*1 If M MUTE N is pressed, press MZN 2
times.
n When monitoring from outside:
Answer the call.
If you want to respond from your monitoring
phone, press
#1 using tone dialing.
You can turn off the baby monitor feature
by pressing
#0 .
Note:
R The unit disconnects the call automatically
after 2 minutes.
Other programming
Changing the handset name
The default handset name is “ Handset 1 ” to
“
Handset 6
” . You can customize the name
of each handset (“Bob”, “Kitchen”, etc.). This is
useful when you make intercom calls between
handsets. To display the handset name in
standby mode, turn on the handset name
display feature (page 45).
Handset
1
M MENU N#104
2
Enter the desired name (10 characters
max.).
a M SAVE N a M OFF N
Displaying the handset name
You can select whether or not the handset
name is displayed in standby mode. The
default setting is
“
Off
” .
Handset
1
M MENU N#105
2
MbN : Select the desired setting. a
M SAVE N a M OFF N
Registering a unit
Operating additional units
Additional handsets
Up to 6 handsets can be registered to the
base unit.
Important:
R See page 4 for information on the available
model.
Registering a handset to the
base unit
The supplied handset and base unit are
pre-registered. If for some reason the handset
For assistance, please visit http://shop.panasonic.com/support 45
Programming
TGF74xUSA_OI_0416_ver211.pdf 45 2020/04/16 8:51:26