Panasonic KX-TGF372AZS, Operating Instructions Manual

Page: 57 / 84

Copying phonebook from a
mobile phone (phonebook
transfer)
You can copy phonebook entries from the
paired mobile phones or other mobile phones
(not paired) to the unit’s phonebook. A mobile
phone must be compatible with Bluetooth
wireless technology.
Important:
R Your mobile phone must support Phone
Book Access Profile (PBAP) or Object
Push Profile (OPP) specification.
R If a copied entry has 2 or more phone
numbers, each phone number (6 max.) is
stored as a separate entry with the same
name.
R If a phonebook entry includes additional
data such as a picture, that entry may fail to
copy to the base unit.
R If your mobile phone includes international
call entries, set the conversion codes
before copying (page 57).
1
Handset:
M MENU N#618
2
Handset:
To copy from paired mobile phones:
MbN : Select the desired mobile phone. a
M SELECT N
R Copied items are stored to the group
(
“ Mobile 1 ” or “ Mobile 2 ” ) which
the mobile phone is paired to.
To copy from other mobile phones
(not paired):
MbN : “ Other mobile ” a M SELECT N
a MbN : Select the group you want to
copy to. a M SELECT N
3
Handset:
When “
Use mobile to
transfer phone book
” is displayed:
Go to step 4.
When “
Select mode
” menu is
displayed:
MbN : Select “
Auto
” or “
Manual
” . a
M SELECT N
“
Auto
” : Download all entries from the
mobile phone automatically. Go to step 5.
“
Manual
” : Copy entries you selected.
R “
Select mode
” menu is displayed
only when the mobile phone supports
PBAP (Phone Book Access Profile) for
Bluetooth connection.
R Some mobile phones may require you
to perform an operation on the mobile
phone even if you select
“
Auto
” .
4
Mobile phone:
Follow the instructions of your mobile
phone to copy phonebook entries.
R For other mobile phones (not paired),
you need to search for and select the
base unit. The Bluetooth PIN (default:
“ 0000 ” ) may be required. If your
mobile phone shows PassKey
confirmation on its display, follow the
directions to proceed.
R The entries being copied are displayed
on the handset.
5
Handset:
Wait until “ Completed ” is displayed.
R You can continue copying other entries
if necessary.
6
Handset: M OFF N
Note:
R Some copied entries may have characters
which do not exist in the character table
(page 34). These characters can be
displayed but cannot be entered when
editing an entry.
R The unit does not support some characters.
If a copied entry includes those characters,
they are replaced with other available
characters or “
H ”.
R If you receive a call while copying
phonebook entries, the copying procedure
stops. Try again after finishing the call.
Setting conversion codes
You must first set the following 3 dialling
codes before transferring the phonebook from
your mobile phone (each 4 digits max.).
–
“
International code
” : An international
prefix used when you make an international
call.
– “
Country code
” : Your country code for
international calls.
57
Using Bluetooth® Devices