–
“
Off
”
: Voice announcement is not
available as alert.
You can configure this setting using either the
base unit or one of the handsets.
Handset / Base unit
1
For CELL 1:
M
MENU
N#6031
For CELL 2:
M
MENU
N#6032
2
MbN
: Select the desired setting.
a
M
SAVE
N
3
Proceed with the operation for your unit.
Handset:
M
OFF
N
Base unit:
M
EXIT
N
Selecting the alert tone
Handset
1
For CELL 1:
M
MENU
N#6041
For CELL 2:
M
MENU
N#6042
2
MbN
: Select the desired setting.
3
M
SAVE
N
a
M
OFF
N
Temporary alert off
You can temporarily disable the alerts by
pressing
M
APP ALERTS
N
.
Base unit
Press
M
APP ALERTS
N
to temporarily disable
alerts.
R
is displayed.
R
To enable alerts again, press
M
APP
ALERTS
N
again.
Using a Bluetooth wireless
headset (optional) for
landline calls
By pairing a Bluetooth headset to the base
unit, you can have a hands-free conversation
wirelessly for landline calls.
Important:
R
Your Bluetooth wireless headset must
support the HeadSet Profile (HSP)
specification.
R
1 headset can be paired to the base unit.
R
Only 2 Bluetooth devices can be used with
the unit at the same time (for example, 2
cellular lines, or the headset and 1 cellular
line).
R
For best performance, we recommend
using a Bluetooth headset within 1 m
(3.3 feet) of the base unit. A headset can
communicate with the base unit within a
range of approximately 10 m (33 feet).
Pairing a headset to the base unit
Important:
R
Make sure that the Bluetooth headset is not
connected to any other Bluetooth device.
1
Your headset:
Set your headset to pairing mode.
R
Refer to the headset operating
instructions.
2
Handset:
M
MENU
N#621
3
If your headset PIN is “
0000
”,
go to
step 4.
If your headset PIN is other than
“
0000
”,
press
M
CLEAR
N
, then enter your
headset PIN.
R
Typically, default PIN is
“
0000
”
. Refer
to the headset operating instructions.
4
Press
M
OK
N
, then wait until a long beep
sounds.
5
M
OFF
N
R
When
is displayed on the base
unit, the headset is available for use.
Connecting/disconnecting a headset
If you cannot connect the headset and base
unit using the headset, you can connect using
the handset.
To use your headset with another Bluetooth
device such as a cellular phone, you may
need to disconnect it from the base unit.
Important:
R
Make sure that the headset is turned on.
Handset
1
To connect/disconnect:
M
MENU
N#622
60
For assistance, please visit www.panasonic.com/support
Using Bluetooth® Devices
TGF37x(en)_1128_ver032.pdf 60
2014/11/28 16:08:42
