Panasonic KX-TGF370 Series, Operating Instructions Manual

Page: 51 / 88

Turning off the baby monitor
The monitored handset cannot be used while
baby monitor is set to
“
On
” .
Handset
1
Press M MENU N on the handset being
monitored.
2
MbN : “
On/Off
” a M SELECT N
3
MbN : “
Off
” a M SELECT N a M OFF N
Editing an outside monitoring number
Handset
1
Press M MENU N on the handset being
monitored.
2
MbN : “
On/Off
” a M SELECT N
3
MbN : “
On
” a M SELECT N
4
MbN : Select the outside line. a M EDIT N
5
M MENU N a MbN : “
Edit
” a M SELECT N
6
Edit the name if necessary. a M OK N
7
Edit the phone number if necessary. a
M OK N a M SELECT N
Erasing an outside monitoring
number
Handset
1
Press M MENU N on the handset being
monitored.
2
MbN : “
On/Off
” a M SELECT N
3
MbN : “
On
” a M SELECT N
4
MbN : Select the outside line. a M EDIT N
5
M MENU N a MbN : “
Erase
” a M SELECT N
6
MbN : “
Yes
” a M SELECT N a M OFF N
Baby monitor sensitivity
You can adjust the sensitivity of the baby
monitor. Increase or decrease the sensitivity to
adjust the sound level needed to trigger the
baby monitor feature.
R This feature cannot be set during a
monitoring call.
Handset
1
Press M MENU N on the handset being
monitored.
2
MbN : “
Sensitivity level
” a
M SELECT N
3
MbN : Select the desired setting. a
M SAVE N a M OFF N
Answering the baby monitor
n When monitoring with a unit:
Handset:
Press M N to answer a call.
Base unit: Press MZN to answer a call.
If you want to respond from the monitoring
unit, press
M MUTE N .
R The monitoring unit will answer calls
automatically when the auto intercom
feature is set to
“
On
” (page 30).
Note:
R If you receive an outside call when
communicating with the monitored
handset, the interrupt tone sounds.
– To answer the call with the handset,
press M OFF N , then press M N .
– To answer the call with the base unit,
press MZN 3 times. *1
*1 If M MUTE N is pressed, press MZN 2
times.
n When monitoring from an outside line:
Answer the call.
If you want to respond from your monitoring
phone, press
#1 using tone dialing.
You can turn off the baby monitor feature
by pressing
#0 .
Note:
R The unit disconnects the call
automatically after 2 minutes.
Other programming
Changing the handset name
The default handset name is “ Handset 1 ” to
“ Handset 6 ” . You can customize the name
of each handset (“Bob”, “Kitchen”, etc.). This is
For assistance, visit www.panasonic.ca/english/support 51
Programming
TG175CSK(en)_0324_ver011.pdf 51 2016/03/24 9:06:20