Problem
Cause/solution
I cannot make a call.
R
You dialled a call restricted number (page 33).
R
The key lock feature is turned on. Turn it off (page 20).
I cannot make or answer a
call.
R
An outside line is being used after a mobile locator feature is
used.
To end the call, press
M
N
on the base unit.
Caller ID/Talking Caller ID
Problem
Cause/solution
Caller information is not
displayed.
R
You must subscribe to a Caller ID service. Contact your phone
service provider for details.
R
If your unit is connected to any additional telephone
equipment, remove and plug the unit directly into the wall jack.
R
If you use a DSL/ADSL service, we recommend connecting a
DSL/ADSL filter between the base unit and the telephone line
jack. Contact your DSL/ADSL provider for details.
R
Other telephone equipment may be interfering with this unit.
Disconnect the other equipment and try again.
Caller information is
displayed or announced
late.
R
Depending on your phone service provider, the unit may
display the callers information at the 2nd ring or later. Set the
first ring to
“
Off
”
R
Move closer to the base unit.
Caller information is not
announced.
R
To use the Talking Caller ID feature, store the name and
phone number in the phonebook (page 21).
R
The handset or base unit’s ringer volume is turned off. Adjust it
(page 17, 26).
R
The Talking Caller ID feature is turned off. Turn it on (page 26).
R
Depending on the number of rings setting, the answering
system may answer calls before announcing the caller
information. Select a different setting (page 42).
Time on the unit has
shifted.
R
Incorrect time information from incoming Caller ID changes the
time. Set the time adjustment to
“
Manual
”
(off) (page 26).
The name stored in the
phonebook is not fully
displayed while an outside
call is being received.
R
Edit the phonebook entry name to fit in 1 line of text (page 22).
48
Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333
Useful Information
TGE72xE_0221_ver005.pdf 48
2019/02/21 14:47:47
