Panasonic KX-TGE662, Operating Instructions Manual

Page: 67 / 108

Key Operation
4 Play new messages
5 Play all messages
6 Play greeting message
76 Record greeting message
8 Turn answering system on
M PAUSE N Pause message *2
9 or
M STOP N
Stop recording
Stop playback
0 Turn answering system off
*4
*3 Erase currently playing
message
*5 Erase all messages
*6 Reset to a pre-recorded
greeting message
*1 If pressed within the first 5 seconds of a
message, the previous message is
played.
*2 To resume playback:
MbN : “
Playback
” a M SELECT N
*3 You can also erase as follows:
M PAUSE N a MbN : “ Erase ” a
M SELECT N a MbN : “
Yes
” a M SELECT N
Calling back (Caller ID subscribers
only)
n Using a landline:
1
Press M PAUSE N during playback.
2
MbN : “ Call back ” a M SELECT N
n Using a cellular line:
1
Press M PAUSE N during playback.
2
MbN : “ Call back (Cell) ” a
M SELECT N
R The unit starts dialing immediately
in the following situations.
– Only 1 cellular phone is paired.
– A specific line is set to make
cellular calls (page 21).
3
MbN : Select the desired cellular phone.
a M SELECT N
Editing the number before calling back
n
Using a landline:
1
Press M PAUSE N during playback.
2
MbN : “
Edit & Call
” a M SELECT N
3
Press M EDIT N repeatedly until the phone
number is shown in the desired format
(page 58).
4
M N
n Using a cellular line:
1
Press M PAUSE N during playback.
2
MbN : “
Edit & Call
” a M SELECT N
3
Press M EDIT N repeatedly until the phone
number is shown in the desired format
(page 58).
4
M CELL N
R The unit starts dialing immediately in
the following situations.
– Only 1 cellular phone is paired.
– A specific line is set to make cellular
calls (page 21).
5
MbN : Select the desired cellular phone. a
M SELECT N
Erasing all messages
1
M MENU N#325
2
MbN : “
Yes
” a M SELECT N a M OFF N
Advanced new message
alerting features
Audible message alert
This feature allows the base unit to beep to
inform you of a new message arrival when
new messages are recorded. The base unit
beeps 2 times every minute until you listen to
the messages, if the
“
Base unit beep
”
setting is turned on. The default setting is
“
Off
” .
1
M MENU N#339
2
MbN : Select the desired setting. a
M SAVE N a M OFF N
For assistance, please visit http://shop.panasonic.com/support 67
Answering System for Landline
TGE66xUSA(en)_1129_ver034.pdf 67 29/11/2017 3:09:16 PM