– 4 –
Link to cell
You can connect your base unit and cellular phone using Bluetooth
®
wireless technology, so that
you can make or answer cellular calls using your phone system. For more details, please visit our
Web site: http://shop.panasonic.com/bluetooth-phone
L
Locate your cellular phone near the base unit. If the cellular phone is too close to the base unit
during a cellular call, you may hear noise. For best performance, we recommend placing the
cellular phone between 0.6 m to 3 m (2 feet to 10 feet) away from the base unit.
1
Cellular line
2
Cellular line service providers
Pairing a Bluetooth cellular phone
1
Base unit:
Press and hold
{
CELL 1
}
or
{
CELL 2
}
for about 5 seconds.
L
After the corresponding CELL indicator on the base unit starts flashing, the rest of the
procedure must be completed within 5 minutes.
2
Your cellular phone:
While the corresponding CELL indicator is flashing, follow the instructions of your cellular
phone to enter the pairing mode.
L
Depending on your cellular phone, it may ask you to enter the Bluetooth PIN (default:
“
0000
”
).
L
If your cellular phone prompts you to confirm the passkey, tap
{
OK
}
or otherwise to accept
the pairing request.
3
Base unit:
Wait until a long beep sounds.
L
It may take more than 10 seconds to complete pairing.
L
When the corresponding CELL indicator lights up, the cellular phone is connected to the
base unit. You are ready to make cellular calls.
Note:
L
Make sure that your cellular phone is set to connect to this product automatically. Refer to your
cellular phone’s operating instructions.
Trademarks
L
The Bluetooth
®
word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.,
and any use of such marks by Panasonic Corporation is under license.
L
All other trademarks identified herein are the property of their respective owners.
1
2
TGE66x_QG(en).fm Page 4 Wednesday, November 29, 2017 12:56 PM
