Turning do not disturb mode on/off
1
M
N#238
2
MbN
: Select the desired setting.
a
M
OK
N
R
If you select
“
Off
”
, press
M
N
to exit.
3
Enter the desired hour and minute you
wish to start this feature.
a
M
OK
N
4
Enter the desired hour and minute you
wish to end this feature.
a
M
OK
N
a
M
N
Changing the start and end time
1
M
N#237
2
Continue from step 3, “Turning do not
disturb mode on/off”, page 28.
Setting the ring delay
This setting allows the handset to ring during
do not disturb mode if the caller waits long
enough. After the selected amount of time
passes, the handset rings. If you select
“
No
Ringing
”
, the handset never rings during do
not disturb mode.
1
M
N#239
2
MbN
: Select the desired setting.
a
M
OK
N
a
M
N
Selecting categories to bypass do
not disturb mode
1
M
N#241
2
MbN
: Select the desired categories.
a
M N
R
“ ” is displayed next to the selected
category numbers.
R
To cancel the selected category:
MbN
: Select the category.
a
Press
M N
again. “ ” disappears.
3
M
OK
N
a
M
N
Baby monitor
This feature allows you to listen in on a room
where the handset is located, allowing you to
easily monitor from different areas of the
house or place. The monitored handset
(placed in a baby’s room, for example) will
automatically call the phone number stored
when it detects sound.
Important:
R
Before using this feature, we recommend
that you test this feature and adjust the
baby monitor sensitivity as needed,
especially if you plan to monitor from
outside.
R
This feature should not be used as a
substitute for a medical or caregiver’s
supervision. It is the caregiver’s
responsibility to stay close enough to
handle any eventuality.
Note:
R
During the monitoring mode, battery
consumption is faster than usual. We
recommend leaving the monitored handset
on the base unit.
R
The monitored handset never rings while it
is being monitored.
Setting the baby monitor
Perform the setting operation with the handset
to be monitored (for example, the handset
placed in a baby’s room).
To monitor from an outside line
If you enable this feature, the unit will call a
pre-programmed phone number when the
handset detects sound. After you answer the
call, you can listen in on the room where the
handset is located.
n
From the phonebook:
1
M
N#268
2
MbN
:
“
On
”
a
M
OK
N
3
MbN
: Select
“
External
”
to monitor
from an outside line.
a
M
N
4
MbN
:
“
Phonebook
”
a
M
OK
N
5
MbN
: Select the phonebook entry.
a
M
OK
N
R
“
Baby Monitor
”
will be displayed.
28
Programming
TGE610HK(en_en)_0817_ver022.pdf 28
2018/08/23 12:37:46
