Using a Bluetooth wireless
headset (optional) for
landline calls
By pairing a Bluetooth headset to the base
unit, you can have a hands-free conversation
wirelessly for landline calls.
Important:
R
Your Bluetooth wireless headset must
support the HeadSet Profile (HSP)
specification.
R
1 headset can be paired to the base unit.
R
Only 2 Bluetooth devices can be used with
the unit at the same time (for example, 2
cellular lines, or the headset and 1 cellular
line).
R
For best performance, we recommend
using a Bluetooth headset within 1 m
(3.3 feet) of the base unit. A headset can
communicate with the base unit within a
range of approximately 10 m (33 feet).
Pairing a headset to the base unit
Important:
R
Make sure that the Bluetooth headset is not
connected to any other Bluetooth device.
1
Your headset:
Set your headset to pairing mode.
R
Refer to the headset operating
instructions.
2
Handset:
M
MENU
N#621
3
If your headset PIN is “
0000
”,
go to
step 4.
If your headset PIN is other than
“
0000
”,
press
M
CLEAR
N
, then enter your
headset PIN.
R
Typically, default PIN is
“
0000
”
. Refer
to the headset operating instructions.
4
Press
M
OK
N
, then wait until a long beep
sounds.
5
M
OFF
N
R
When the HEADSET indicator on the
base unit lights up, you are ready to
use the headset.
Connecting/disconnecting a headset
If you cannot connect the headset and base
unit using the headset, you can connect using
the handset.
To use your headset with another Bluetooth
device such as a cellular phone, you may
need to disconnect it from the base unit.
Important:
R
Make sure that the headset is turned on.
1
To connect/disconnect:
M
MENU
N#622
R
A long beep sounds.
2
M
OFF
N
Unpairing a headset
You can cancel a pairing of the headset that is
stored to the base unit.
1
M
MENU
N#612
2
MbN
:
“
Yes
”
a
M
SELECT
N
R
When the headset is unpaired, the
HEADSET indicator is turned off.
3
M
OFF
N
Operating a Bluetooth wireless
headset using a landline
Important:
R
Refer to your headset operating instructions
for headset operations.
Making landline calls with your
headset
Base unit
*1
*1 KX-TGE470 series: page 4
1
Press your headset’s button referring to
your headset operating instructions.
2
Dial the phone number using the base
unit after hearing the dial tone on your
headset.
3
When you finish talking, press your
headset’s button referring to your headset
operating instructions.
56
For assistance, please visit http://shop.panasonic.com/support
Using Bluetooth® Devices
TGE46x47x(en)_1117_ver061.pdf 56
2015/11/17 15:14:15
