Unblocking Numbers I No Longer Wish to Block:
14.
On the handset press
[MENU]
[#]
[2]
[1]
[7]
15.
Press the
[▲]
or the
[▼]
to select your desired entry
16.
Press the soft key
[ERASE]
17.
Press
[SELECT]
on "Yes"
18.
Press
[OFF]
to exit the setting.
**For additional information, please refer to the Operating Manual.
How do I clear 'New Voicemail' on my handset's display?
Your telephone is alerting you that you have a new voice message from your phone
company's assigned Voice mailbox. The procedure to access your voice mailbox would
vary depending on the instructions of your phone company/service provider. Once you
listen to your new messages, "New Voicemail" should be cleared from the handset.
Note:
If the handset still indicates there are new messages even after you have listened to
all new messages, turn it off by pressing and holding
[#]
until the handset beeps.
If you do not have voicemail service through your telephone service provider that you are
aware of:
Press
[MENU] [#] [3] [3] [2]
then press
[0]
to select
OFF
followed by SAVE to disable
the Voicemail Tone Detector of the telephone..
How can I re-register my handset or register additional handsets?
To register a handset, perform the following steps:
1.
Press
[MENU]
[#]
[1]
[3]
[0]
on the Handset
2.
Press and hold down the
[LOCATOR]
button on the base for about 5 seconds
until you hear the registration tone
If all registered handsets starts ringing, press
[LOCATOR]
again to stop, then
repeat this step, procedure needs to be completed within 90 seconds
3.
Press
[OK]
on the handset
Why does the date and time change automatically after I have programmed the date and
time on my phone?
If you are subscribed to Caller ID from your phone company, the unit's date and time
setting will be automatically adjusted when caller information is received. If you do not
wish for this feature to work, press
[MENU]
[#]
[2]
[2]
[6]
on the handset, then press
[0]
to select "Manual" and press
[SAVE]
Applicable Base Model(s):
