Panasonic KX-TGE262C, Operating Instructions Manual

Page: 30 / 80

Handset locator
You can locate a misplaced handset by
paging it.
1
Base unit: Press M LOCATOR N or
M HANDSET LOCATOR N .
R All registered handsets beep for 1
minute.
2
To stop paging:
Base unit:
Press M LOCATOR N or M HANDSET
LOCATOR N .
Handset:
n KX-TGE260 series: page 3
Press M OFF N .
n KX-TG465SK series: page 3
Press M N , then press M OFF N .
Using the Smart function key
You can also stop paging:
– KX-TGE260 series: press
M N .
– KX-TG465SK series: press M N , then
press M OFF N .
Cell locator
This feature allows you to locate a misplaced
cellular phone by pressing the
M LOCATES
CELL N button on the base unit and calling
your cellular phone. You must assign your
cellular phone’s phone number to the button
beforehand. Only 1 cellular phone number (24
digits max.) can be assigned.
Adding a phone number
1
M MENU N#248
R If you have already stored a cellular
phone number, the current number is
displayed.
2
Enter your cellular phone number. a
M SAVE N a M OFF N
Erasing the number
1
M MENU N#248
2
Press and hold M CLEAR N until all digits
are erased. a M SAVE N a M OFF N
Calling the misplaced cellular
phone
Base unit: M LOCATES CELL N
R To stop calling:
– KX-TGE260 series: press
M LOCATES
CELL N again.
– KX-TG465SK series: press MZN .
Important:
R While the base unit is calling the cellular
phone, the outside line is used.
– KX-TGE260 series: Even if the cellular
phone answers, you cannot talk with the
cellular phone. To end the call, press
M LOCATES CELL N on the base unit.
– KX-TG465SK series: When the cellular
phone answers, you can talk with the
cellular phone. To end the call, press
MZN on the base unit.
Charges may be incurred if the cellular
phone answers the call.
Intercom
Intercom calls can be made:
– between handsets
– between a handset and the base unit
*1
*1 KX-TG465SK series: page 3
Note:
R When paging unit(s), the paged unit(s)
beeps for 1 minute.
R If you receive an outside call while talking
on the intercom, the interrupt tone sounds
(page 40).
– To answer the call with the handset,
press M OFF N , then press the
corresponding line key.
– To answer the call with the base unit,
press MZN , then press the corresponding
line key. *1
*1 KX-TG465SK series: page 3
30
Locator/Intercom
TGE26x_27xC(en)_1224_ver012.pdf 30 2013/12/24 15:43:30