Panasonic KX-TGE262C, Operating Instructions Manual

Page: 22 / 80

2
MbN : Select the desired phone number.
3
M N
Pause (for PBX/long distance service
users)
A pause is sometimes required when making
calls using a PBX or long distance service.
When storing a calling card access number
and/or PIN in the phonebook, a pause is also
needed (page 34).
Example: If you need to dial the line access
number “9” when making outside calls with a
PBX:
1
9 a MDN (Pause)
2
Dial the phone number. a M N
Note:
R A 3.5 second pause is inserted each time
MDN (Pause) is pressed.
Answering calls
When a call is being received, the ringer
indicator and
indicator flash rapidly.
1
Lift the handset and press M N or MZN
when the unit rings.
R To answer a cellular call, you can also
press
M CELL N .
2
When you finish talking, press M OFF N or
place the handset on the base unit or
charger.
Any key answer: You can answer the call by
pressing any dial key.
Auto talk: You can answer calls simply by
lifting the handset (page 41).
Temporary handset ringer off: You can turn
the ringer off temporarily by pressing M N .
Using the Smart function key
When the indicator flashes rapidly, press
M N .
R You can answer the call even if the handset
is placed on the base unit or charger
(page 15).
You can finish talking by pressing M OFF N
without lifting up the handset.
Adjusting the handset ringer volume
Press MjN or MkN repeatedly to select the
desired volume while ringing.
Useful features during a
call
Hold
1
Press M MENU N during an outside call.
2
MbN : “
Hold
” a M SELECT N
3
To release hold on the cellular line:
Press M CELL N . *1
R Another handset user can take the call
by pressing
M CELL N .
*1
*1 If you press M CELL N and the
selection list is displayed, select
the desired cellular line and press
M SELECT N .
R The base unit user can take the call by
pressing
M CELL 1 N or M CELL 2 N .
(KX-TG465SK series: page 3)
To release hold on the landline:
Press M N .
R Another handset user can take the call
by pressing
M N .
R The base unit user can take the call by
pressing
MZN . (KX-TG465SK series:
page 3)
Note:
R After holding for 10 minutes, the call is
disconnected.
Mute
1
Press M MUTE N during a call.
2
To return to the call, press M MUTE N .
Note:
R M MUTE N is a soft key visible on the display
during a call.
22
Making/Answering Calls Using the Handset
TGE26x_27xC(en)_1224_ver012.pdf 22 2013/12/24 15:43:30