Panasonic KX-TGE260 Quick Manual Download Page 4

– 4 –

Pairing a Bluetooth cellular phone

1

Handset:

For CELL 1: 

{

MENU

}

(

6241

For CELL 2: 

{

MENU

}

(

6242

L

After the corresponding CELL indicator on the base unit starts flashing, the rest of the 
procedure must be completed within 5 minutes.

2

Your cellular phone:

While the corresponding CELL indicator is flashing, follow the instructions of your cellular 
phone to enter the pairing mode.

L

Depending on your cellular phone, it may ask you to enter the Bluetooth PIN (default: 

0000

). If your cellular phone shows PassKey confirmation on its display, follow the 

directions to proceed.

3

Handset:

Wait until a long beep sounds.

L

It may take more than 10 seconds to complete pairing.

L

When the corresponding CELL indicator lights up, the cellular phone is connected to the 
base unit. You are ready to make cellular calls.

4

{

OFF

}

Note:

L

Make sure that your cellular phone is set to connect to this product automatically. Refer to your 
cellular phone’s operating instructions.

Base unit: CELL indicators

Status

Meaning

On

A cellular phone is connected. Ready to make/receive cellular 
calls.

Flashing

The cellular line is in use.

Phonebook entries are being copied from a cellular phone.

The base unit is searching for the paired cellular phone.

The base unit is pairing a cellular phone.

A cellular call is put on hold.

Flashing rapidly

A cellular call is being received.

Light off

A cellular phone is not paired to the base unit.

A cellular phone is not connected to the base unit.

Handset: Link to cell display items

t

d

A cellular line is in use.

*1

L

When flashing: The cellular call is put on hold.

L

When flashing rapidly: A cellular call is being received.

*1 Corresponding cellular line(s) is(are) indicated next to the item.

x

d

A cellular phone is connected.

*1

 Ready to make/receive cellular calls.

L

When turned off: A cellular phone is not connected to the base unit.

*1 Corresponding cellular line(s) is(are) indicated next to the item.

uv

A cellular call is being done on that line.

The cellular line is selected for the setting.

Link to cell

TGE26x_27x_QG(en).fm  Page 4  Wednesday, December 11, 2013  9:03 PM

Summary of Contents for KX-TGE260











Reviews: