Voicemail service
In addition to your unit’s answering system you may also have voicemail service from
your phone service provider.
Voicemail is an answering service that may be offered by your
phone service provider. This service can also record calls when you are unavailable to answer
the phone or when your line is busy. Messages are recorded on the phone company system and
not on the unit’s answering system.
R
To use the voicemail service rather than the unit’s answering system, turn off the answering
system (page 33).
If you have unit’s answering system set to on and also the voicemail enabled, the system with
least amount of rings will record the message first.
Example:
If the unit’s answering system is set to 5 rings (page 36) and the voicemail answering system
provided by your phone company is set to 6 rings (call your service provider), the unit’s
answering system will record the incoming call first.
When you have new messages,
is displayed on the handset if message indication service is
available. Please contact your phone service provider for details of this service.
Important:
R
If
still remains on the display even after you have listened to new messages, turn it off by
pressing and holding
#
for 2 seconds.
Character entry
The dial keys are used to enter characters and numbers. Each dial key has multiple characters
assigned to it. The characters that can be entered depend on the character entry mode
(page 38).
– Press
MFN
or
MEN
to move the cursor left or right.
– Press dial keys to enter characters and numbers.
– Press
M
CLEAR
N
to erase the character or number highlighted by the cursor. Press and hold
M
CLEAR
N
to erase all characters or numbers.
– Press
*
(A
a
a) to switch between uppercase and lowercase.
– To enter another character located on the same dial key, press
MEN
to move the cursor to the
next space, then press the appropriate dial key.
– If you do not press any dial key within 2 seconds after entering a character, the character is
fixed and the cursor moves to the next space.
Character entry modes
The available character entry modes are Alphabet (ABC), Numeric (0-9), Greek (
),
Extended 1 (
), Extended 2 (
), and Cyrillic (
). When in these entry modes except
Numeric, you can select which character is entered by pressing a dial key repeatedly.
When the unit displays the character entry screen:
M
ECO
N
a
MbN
: Select a character entry mode.
a
M
OK
N
Note:
R
in the following tables represents a single space.
38
Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333
Useful Information
TGC41x_42xE(en)_0229_ver011.pdf 38
2016/02/29 15:10:39
