Panasonic KX-TGC410E, Operating Instructions Manual

Page: 27 / 48

*11 KX-TGC410 series: page 3
Alarm
An alarm sounds at the set time for 1 minute
and is repeated 5 times at 5 minute intervals
(snooze function). A text memo can also be
displayed for the alarm. A total of 3 separate
alarm times can be programmed for each
handset. You can set one of 3 different alarm
options (once, daily, or weekly) for each alarm
time.
Important:
R Make sure the unit’s date and time setting
is correct (page 15).
1
M MENU N#720
2
MbN : Select the desired alarm. a M OK N
3
MbN : Select the desired alarm option. a
M OK N
“
Off
”
Turns alarm off. Go to step 9.
“
Once
”
An alarm sounds once at the set time.
“
Daily
”
An alarm sounds daily at the set time.
Go to step 5.
“
Weekly
”
Alarm sounds weekly at the set time(s).
4
Proceed with the operation according to
your selection in step 3.
n Once:
Enter the desired date and month. a
M OK N
n Weekly:
MbN : Select the desired day of the week
and press M SELECT N . a M OK N
5
Set the desired time. a M OK N
6
Enter a text memo (10 characters max.).
a M OK N
7
MbN : Select the desired alarm tone. a
M OK N
R We recommend selecting a different
ringer tone from the one used for
outside calls.
8
MbN : Select the desired snooze setting.
a M OK N
9
M OK N a M OFF N
Note:
R Press M STOP N to stop the alarm completely.
R When the handset is in use, the alarm will
not sound until the handset is in standby
mode.
R Press any dial key or M SNOOZE N to stop
the sound but keep the snooze function
activated.
R If you want to make an outside call when
the snooze function is activated, please
stop the snooze function before making the
call.
Nuisance call block
This feature blocks calls from unwanted
callers (Caller ID subscribers only). The
following items are available when storing
phone numbers in the call block list.
–
“
Single Number
” : The unit blocks calls
from specific phone numbers.
– “
Range of Numbers
” : The unit blocks
calls that begin with a number stored in the
call block list, such as a toll-free phone
number prefix or certain area codes.
Single phone numbers and ranges of numbers
can be stored in the call block list:
– up to 30 items in total. (KX-TGC410 series:
page 3)
– up to 50 items in total. (KX-TGC420 series:
page 3)
You can also set the unit to block calls that
have no phone number.
When a call is received, the unit does not ring
while the caller is being identified. If the
caller’s phone number matches an entry in the
Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333 27
Programming
TGC41x_42xE(en)_0229_ver011.pdf 27 2016/02/29 15:10:38