telephone company. Contact your service
provider/telephone company on how to
operate this service and how you will be
notified that you have messages. To use
this service you will be required to leave
your answering machine off on your unit
(page 30). This will allow the service to
receive any messages.
R
To use the unit’s answering machine rather
than the service provided by your service
provider/telephone company, please
contact your service provider/telephone
company to have it removed or deactivated
permanently or temporarily. Alternatively
you can leave this service connected and
change the
“
Number of Rings
”
to a
shorter duration on your unit so your unit’s
answering machine can pick up the call
prior to the service provided by your service
provider/telephone company.
Caller’s recording time
You can change the maximum message
recording time allowed for each caller. The
default setting is
“
3 Minutes
”
.
1
M
N#305
2
MbN
: Select the desired setting.
a
M
OK
N
a
M
N
Selecting “
Greeting Only
”
You can select
“
Greeting Only
”
which sets
the unit to announce a greeting message to
callers but not record messages.
Select
“
Greeting Only
”
in step 2 on
“Caller’s recording time”, page 34.
Note:
R
When you select
“
Greeting Only
”
:
– If you do not record your own message,
the unit will play the pre-recorded
greeting-only message asking callers to
call again later.
– If you use your own message, record the
greeting-only message asking callers to
call again later (page 30).
34
Answering System
TGC21x_22xNZ_OI_(en-en)_0513_ver.002.pdf 34
2014/05/13 12:05:49
