Panasonic KX-TGBA85, Installation Manual

Page: 8 / 20

8
For assistance, please visit http://shop.panasonic.com/support
Installation
Registering a handset to a base unit
Base unit:
1
Press and hold
L
LOCATOR/INTERCOM
R
for 5 seconds. The base unit will
remain in registration mode for 120 seconds.
Handset:
2
“ Register your Handset” , press
L
OK
R
. “Press locator Key for 5 sec” ,
press
L
OK
R
and then enter the 4-digit PIN code (default = 0000),
L
OK
R
.
Note:
If an error tone sounds, or if is displayed, register the handset according to
the base unit’s operating instructions.
Display language (Handset) (default: “English”)
1
L
Menu
R
,
L
d
R
“
Personal set
”
,
L
OK
R
.
2
L
d
R
“
Language
”
,
L
OK
R
.
3
L
s
R
: Select the preferred language,
L
OK
R
.
FCC and other information
This equipment is hearing aid compatible as defined by the FCC in 47 CFR
Section 68.316.
When you hold the phone to your ear, noise might be heard in your Hearing Aid.
Some Hearing Aids are not adequately shielded from external RF (radio frequency)
energy. If noise occurs, use an optional headset accessory or the speakerphone
option (if applicable) when using this phone. Consult with your audiologist or
Hearing Aid manufacturer about the availability of Hearing Aids which provide
adequate shielding to RF energy commonly emitted by digital devices.
WHEN PROGRAMMING EMERGENCY NUMBERS AND(OR) MAKING
TEST CALLS TO EMERGENCY NUMBERS:
1) Remain on the line and briefly explain to the dispatcher the reason for the call.
2) Perform such activities in the off-peak hours, such as early morning or
late evenings.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.