Programming
18
Special programming
Alarm
An alarm sounds at the set time (once or daily)
for 2 minutes. You can also customise the
repeat times and the repeat cycle (snooze
function). Alarm can be set for each handset.
Example:
If you want the alarm to sound 3
times, repeating at 5 minute intervals from
7:00, you need to set the alarm as follows;
Time:
“
07:00
”
“
Repeat Times
”
:
“
3 Times
”
“
Repeat Cycle
”
:
“
5 Minutes
”
Important:
L
Set the date and time beforehand (page
12).
1
{j
/OK
}
2
{
r
}
:
“
Set Time
”
s
{j
/OK
}
3
{
r
}
:
“
Alarm
”
s
{j
/OK
}
4
{
r
}
:
“
Alarm Mode
”
s
{j
/OK
}
5
{
r
}
: Select the desired alarm option.
s
{j
/OK
}
6
Set the desired time.
s
{j
/OK
}
7
{
r
}
:
“
Repeat Times
”
s
{j
/OK
}
8
{
r
}
: Select the desired setting.
s
{j
/OK
}
L
If you only want the alarm to sound 1
time, select
“
Off
”
and go to step 11.
9
{
r
}
:
“
Repeat Cycle
”
s
{j
/OK
}
10
{
r
}
: Select the desired setting.
s
{j
/OK
}
11
{
r
}
:
“
Ringtone
”
s
{j
/OK
}
12
{
r
}
: Select the desired alarm tone.
s
{j
/OK
}
L
We recommend selecting a different
ringer tone from the one used for
outside calls.
13
{
r
}
:
“
Volume
”
s
{j
/OK
}
14
{
r
}
: Select the desired volume.
s
{j
/OK
}
15
{
m
}
Note:
L
Press
{
m
}
to stop the alarm completely.
L
Press any dial key from
z
to
9
,
*
, or
y
to stop the sound but keep the set time
and/or the snooze function activated.
L
When the handset is in use, the alarm will
not sound until the handset is in standby
mode.
“
Off
”
Turns alarm off. Go to step 15.
“
Once
”
An alarm sounds once at the set time.
“
Daily
”
An alarm sounds daily at the set time.
TGB21xAL(en).book Page 18 Friday, March 21, 2014 10:31 AM
