25
Programming
3
If the handset is already
registered to a base, press
L
m
R
,
L
d
R
“ADVANCED SET”
,
press
L
m
R
.
4
L
d
R
“REGISTER”
, press
L
m
R
.
5
Enter the 4 digit PIN code (default
= 0000), press
L
m
R
.
A beep will be heard if the registration
is successful. The handset is
automatically assigned an available
handset number. Use this number
when making internal calls.
Note:
If registration is not successful the
first time, please repeat the process
again in case the base registration
period ran out of time. If the base
is not found after a few seconds,
the handset returns to standby. Try
registering again.
De-register a handset
Available for: KX-TGB112
Use one handset to de-register
another. The handset being used
cannot de-register itself.
1
L
m
R
,
L
d
R
“ADVANCED
SET”
, press
L
m
R
.
2
L
d
R
“UNREGISTER”
, press
L
m
R
.
3
Enter the 4 digit PIN code (default
= 0000), press
L
m
R
.
4
L
d
R
to select the handset that
needs to be de-registered. A
confirmation beep will be heard
and the display will return to the
previous menu.
When entering a PIN, the digits are
shown as ****.
1
L
m
R
,
L
d
R
“ADVANCED
SET”
, press
L
m
R
.
2
L
d
R
“CHANGE PIN”
, press
L
m
R
.
3
If the PIN is already changed
from default setting, enter the
current 4 digit PIN, press
L
m
R
.
4
Enter a new 4 digit PIN, press
L
m
R
.
5
Re-enter the new PIN.
6
L
m
R
to confirm or
L
p
R
to return
to the previous menu.
IMPORTANT
If the PIN code is changed, please
keep a record of the new number.
Registering a handset
Note:
Handset batteries must be fully
charged before registration. Hold the
handset close to the base during the
registration process.
Handsets that were supplied with the
base are already pre-registered.
On the base:
1
Press and hold
L
p
R
for 5
seconds. The base will remain in
registration mode for 90 seconds.
On the handset:
2
If the handset is not registered
to a base, press
L
m
R
and then
enter the 4 digit PIN code (default
= 0000), press
L
m
R
.
KX-TGB112UE.indd 25
12/01/2017 11:54
