Panasonic KX-TGB110AL, Operating Instructions Manual

Page: 10 / 32

10
Getting Started
During a power failure
The unit will not work during a power
failure. We recommend connecting
a corded-type telephone (without AC
adaptor) to the same telephone line
or to the same telephone line socket
using a telephone double adaptor.
Note for battery installation
● Use the supplied rechargeable
batteries. For replacement, we
recommend using the Panasonic
rechargeable batteries noted on
page 3 and 5.
Note for battery charging
● It is normal for the handset to feel
warm during charging.
● Clean the charge contacts of the
handset, base unit and charger
with a soft and dry cloth once a
month. Before cleaning the unit,
disconnect from power outlets and
any telephone line cords. Clean
more often if the unit is exposed to
grease, dust, or high humidity.
Battery level
Battery is fully charged
Battery is partially charged
Battery is running low
Flashes when battery is
almost fully discharged
Battery charging
Charge for at least 7 hours.
When the handset needs charging,
the display shows “LOW BATTERY”
and there is a warning beep every 2
minutes during a call, recharge the
handset before using it again. When
charging, icon will scroll on the
display.
Note when setting up
Note for connections
● The AC adaptor must remain
connected at all times. (It is normal
for the adaptor to feel warm during
use.)
● The AC adaptor should be
connected to a vertically oriented
or floor-mounted AC outlet. Do
not connect the AC adaptor to a
ceiling-mounted AC outlet, as the
weight of the adaptor may cause it
to become disconnected.
● The unit is not designed to be
used with rotary/pulse dialling
services.