– 4 –
Registering a handset to a base unit
1
Base unit:
KX-TG9311/KX-TG9361
Press and hold
{
LOCATOR
}
for 4 seconds. (No registration tone)
KX-TG9331/KX-TG9341
Press and hold
{
LOCATOR
}
for 4 seconds until the registration tone
sounds.
L
If all registered handsets start ringing, press the same button to
stop. Then repeat this step.
L
The next step should be completed within 90 seconds.
2
Handset:
Press
{
OK
}
, then wait until a long beep sounds.
Note:
L
While registering,
“
Base registering
”
is displayed on all
registered handsets.
L
If
“
Error!!
”
is displayed while registering, press
{
OFF
}
and register
the handset again.
Wall mounting
1
Drive the screws (not included) into the wall.
2
Mount the charger (
A
), then slide it down (
B
) and to the right (
C
)
until it is secure.
25.4 mm
Screws
(220-240 V AC, 50/60 Hz)
A
B
C
TGA930BX(e).fm Page 4 Thursday, March 13, 2008 6:25 PM
