Panasonic KX-TGA661, Installation Manual

Page: 5 / 80

5
Battery installation/Battery charging
(page 2:
2
)
Important:
• Use the supplied rechargeable batteries. For replacement, we recommend
using the Panasonic rechargeable batteries noted in the base unit’s operating
instructions.
• Wipe the battery ends (
S
,
T
) with a dry cloth.
• Avoid touching the battery ends (
S
,
T
) or the unit contacts.
• Confirm correct polarities (
S
,
T
).
• USE ONLY Ni-MH batteries AAA (R03) size.
• Do NOT use Alkaline/Manganese/Ni-Cd batteries.
Place the handset on the charger for about 7 hours before initial use.
Note:
• The handset display may show “
Please wait for 1 minute.
” when the
handset is placed on the charger if it is not registered to the base unit.
• If the batteries are fully charged, but the operating time seems to be shorter,
clean the battery ends (
S
,
T
) and the charge contacts with a dry cloth and
charge again.
Display language
1
8
/
1
(middle soft key)
(
11
)
2
{
r
}
: Select your desired language.
s M s
{i
c
}
Registering the handset to the base unit
Ensure that the handset is switched on. If it is not on, press and hold
{i
c
}
for
few seconds to turn the handset on.
1
Handset:
Lift the handset and press
{i
c
}
.
2
Base unit:
Proceed with the operation for your model.
N
KX-TG6611/KX-TG8051/KX-TG8611/KX-TG8621
Press and hold
{x}
for about 5 seconds. (No registration tone)
N
KX-TG6621/KX-TG6631/KX-TG8061
Press and hold
{x}
for about 5 seconds, until the registration tone sounds.
When the language selection is displayed after installing the batteries for the
first time, you can select your desired language.
{
r
}
: Select your desired language.
s M s
{i
c
}
TGA661EX(ex).book Page 5 Wednesday, April 13, 2011 4:16 PM