Camera Monitoring
14
Camera monitoring
using a handset
With a colour display handset (KX-
TGA591AL), you can monitor the image
and sound of the room where the cordless
camera is located. The monitored camera
does not ring, allowing you to easily
monitor a baby’s room, for example, from
different areas of the house.
Important:
L
Before you start monitoring, confirm that
the camera lens of the cordless camera
has been adjusted to the correct angle.
L
Only 1 person can access the cordless
camera at a time.
L
A refreshed image taken by the cordless
camera is displayed every few seconds.
The displayed image is not a moving
picture. Selecting enhanced motion
mode shortens the interval (page 11).
L
While monitoring a cordless camera,
other users cannot make an intercom
call or transfer a call.
L
The monitoring connection is
automatically cancelled after 10
minutes.
L
While monitoring you cannot place the
handset on the base unit or charger. The
monitoring connection will be cancelled.
L
The cordless camera may not page
handsets in the following conditions:
– when other users are on an intercom
or conference call.
– when electrical interference is emitted
from electrical devices.
– while you are on a call with the
handset. (In this case you will hear 2
tones and
z
will flash on the
handset.)
Monitoring the cordless camera
from a handset
1
{
INTERCOM
}
2
Select the desired cordless camera.
i
{
CALL
}
3
Speak to the cordless camera user if
necessary.
OR
To mute your sound output, press
{
MUTE
}
if necessary.
4
When you finish monitoring, press
{
OFF
}
or place the handset on the base
unit or charger.
Adjusting receiver/speaker volume
Push
{^}
or
{V}
while monitoring.
Talking to the paged party using the
cordless camera
When the cordless camera is paged from a
handset, the cordless camera does not
ring and the speakerphone is turned on.
Handset
TGA593AL(e).book Page 14 Thursday, April 20, 2006 3:01 PM
