While the radio is on, press
[SLEEP]
repeatedly to select the time (minutes).
•
Each time you press
[SLEEP]
, the time will
change as follows:
•
The radio will automatically turn off after the selected sleep time.
•
You cannot set the sleep timer while an alarm is sounding (4-A, 4-B).
To view the time remaining:
Press
[SLEEP]
.
To change the setting
1. Press
[SLEEP]
. (The time remaining is displayed.)
2. Immediately after the time remaining is displayed, press
[SLEEP]
repeatedly to select the sleep time.
2
Listening to the Radio
Section 2
2-C Improving Reception
For assistance, please call: 1-800-211-PANA(7262)
[OFF]
[+, -, TUNE/CLOCK]
Memory Buttons
(
[M1]
,
[M2]
,
[M3]
,
[M4]
and
[M5]
)
[SNOOZE/MUTE]
VOLUME Control
[FM/AM, RADIO]
Loud
2-B Preset Tuning
You can assign one FM station and one AM station to each of the 5
memory buttons (
[M1]
,
[M2]
,
[M3]
,
[M4]
and
[M5]
) for a total of 10
stations.
To preset stations
1
Press
[FM/AM, RADIO]
to turn the radio on.
2
Press
[FM/AM, RADIO]
to switch between FM and AM.
3
Tune in to the desired station by pressing
[+, TUNE/CLOCK]
or
[–, TUNE/CLOCK]
.
•
Press and hold
[+]
or
[–]
to search faster.
4
Press and hold a memory button (
[M1]
to
[M5]
) until the memory number is
displayed.
•
To turn the radio off, press
[OFF]
.
•
If you assign another station of the same band (FM or AM) to the
memory button, the previously assigned station will be erased.
•
If a power failure occurs, station presets will be retained for about 10
minutes.
To listen to preset stations
1
Press
[FM/AM, RADIO]
to turn the radio on.
2
Press
[FM/AM, RADIO]
to switch between FM and AM.
3
Press the desired memory button (
[M1]
to
[M5]
).
•
To turn the radio off, press
[OFF]
.
For FM
Extend the cord and place
the antenna in a location
where reception improves.
For AM
Reorient the antenna horizontally
until reception improves.
2-A Manual Tuning
1
Press
[FM/AM, RADIO]
to turn the radio
on.
2
Press
[FM/AM, RADIO]
to switch
between FM and AM.
3
Tune in to the desired station by pressing
[+, TUNE/CLOCK]
or
[–, TUNE/CLOCK]
.
•
Press and hold
[+]
or
[–]
to search faster.
4
Adjust the volume using the VOLUME control.
To turn the radio off
Press
[OFF]
.
2-D Muting the Radio
Press
[SNOOZE/MUTE]
while listening to the radio.
•
“
” flashes on the display.
•
To release the mute, press
[SNOOZE/MUTE]
again.
Ex. Memory Number 1
2-E Changing the FM Tuning Sensitivity
You can change the sensitivity used for tuning in FM stations
from 0.2 MHz (factory preset) increments to 0.1 MHz.
•
Note that if you change the sensitivity, all FM station presets (2-B)
and the station used for the radio alarm (4-A) will return to the
factory preset. The buzzer will sound at the set radio alarm time.
1. Press
[FM/AM, RADIO]
to turn the radio on.
2. Press
[FM/AM, RADIO]
to switch to the FM band.
3. Press and hold
[FM/AM, RADIO]
for about 5 seconds.
•
The display changes to show the lowest available FM frequency.
•
To change the sensitivity back to 0.2 MHz increments, repeat the
procedure above.
•
If the AM band is selected and you press and hold
[FM/AM, RADIO]
for about 5 seconds, the band will change to FM but the FM tuning
sensitivity will not change.
3-A Setting the Sleep Timer
3
Using the Sleep Timer
Section 3
The sleep timer turns the radio off
after a set time.
[SLEEP]
30
60 90 120 OFF
Ex. Sleep Time: 30 min.