![Panasonic KX-TGA520M - Accessory Handset For KX-TG5200M Series Expandable... Installation Manual Download Page 3](http://html1.mh-extra.com/html/panasonic/kx-tga520m-accessory-handset-for-kx-tg5200m-series-expandable/kx-tga520m-accessory-handset-for-kx-tg5200m-series-expandable_installation-manual_3890787003.webp)
– 3 –
For assistance, please call: 1-800-211-PANA(7262)
Registration
This cordless handset must be registered to a KX-TG5200/KX-TG5202/KX-TG5210/
KX-TG5212/KX-TG5213/KX-TG5230/KX-TG5240/KX-FPG391 base unit. The handset will
be assigned the extension number at registration. Only one handset can be registered at a
time.
Charge the battery fully. Make sure the base unit and the other handsets are not
being used. Have both the handset and base unit nearby during registration.
•
Base unit model shown here is KX-TG5240.
*
The location of the
LOCATOR
button varies by base unit model.
KX-TG5200/KX-TG5202:
LOCATOR [ ]
,
[ ]
,
[ ]
,
[ ]
or
[
]
KX-TG5210/KX-TG5212/KX-TG5213:
LOCATOR/INTERCOM [ ]
,
[ ]
,
[ ]
,
[ ]
or
[
]
KX-TG5230/KX-TG5240/KX-FPG391:
[LOCATOR/INTERCOM/TRANSFER]
The handset display shows the instructions as shown on the
right.
•
The registered number “
[1]
” to “
[4]
” is shown on the top right of the display.
•
You can stop registration by pressing
[OFF]
on the handset and pressing the *
LOCATOR
button on the base unit.
•
If you try to register this handset to the KX-TG6500 base unit, “
Wrong handset Refer
to manual
” is displayed. The base units for this handset are mentioned above.
1
Base unit:
Press and hold the *
LOCATOR
button for 3 seconds.
•
The CHARGE indicator flashes. After the CHARGE indicator starts flashing, the rest of
the procedure must be completed within 1 minute.
•
On the KX-FPG391, “
HS REGISTRATION
” is displayed.
2
Handset:
(1) Press the soft key (
).
(2) Wait until a long beep sounds and the display
shows the new extension number.
•
Registration is complete.
To cancel the handset registration, please see your base unit Operating Instructions.
OK
OK
BACK
BACK
CHARGE Indicator
*
LOCATOR
Button
To operate “
”,
press the right soft key.
OK
1
Press LOCATOR
on base unit
for 3 sec.
Then press OK
[-]
L
Press LOCATOR
on base unit
for 3 sec.
Then press OK
L
BACK
PLAY
O K
OK
SP
I
PRIVACY
1
Handset
Registering
IN USE
[-]
SP
I
PRIVACY
1
Handset [2]
Registered
IN USE
[2]
Ex. Extension number 2
TGA520.fm Page 3 Tuesday, January 20, 2004 4:39 PM