Panasonic KX-TGA470 Operating Instructions Manual Download

Page: 16 / 88

Item

Meaning

Blocked call (page 41)

Clarity booster is on.

(page 24)

In use

Answering system is being
used by another handset or
the base unit.

Cell1 in
use

Someone is using the cellular
line.

Cell2 in
use
Line in
use

Someone is using the landline.

*1 Corresponding cellular line(s) is indicated

next to the item.

*2 During a cellular call, the item is not

displayed even though the feature is
activated.

*3 Corresponding lines (1, 2: cellular line, L:

landline) are indicated next to the item. If
all lines are turned off, no line is indicated.

Base unit display item

Item

Meaning
“

Greeting only

”

is selected

as the caller’s recording time.
In this case, the answering
system answers calls with a
greeting message and caller
messages are not recorded.
(page 53)

CELL 1/CELL 2 indicators on the
base unit

The CELL 1/CELL 2 indicators show each
cellular line status.

Status

Meaning

Green
(On)

A cellular phone is connected.
Ready to make/receive
cellular calls.

Green
(Flashing)

– The cellular line is in use.
– Phonebook entries are

being copied from a
cellular phone (page 46).

Status

Meaning

Green
(Flashing
rapidly)

A cellular call is being
received.

Amber
(On)

A cellular phone is not
connected to the base unit
(page 20).

Amber
(Flashing
rapidly)

The base unit is searching for
the registered cellular phone.

Red
(Flashing)

– The base unit is registering

a cellular phone.

– A cellular call is put on hold.

Light off

A cellular phone is not
registered to the base unit.

HEADSET indicator on the base unit

The HEADSET indicator shows the Bluetooth
headset status.

Status

Meaning

Green
(On)

A Bluetooth headset is
connected to the base unit.
Ready to use it.

Green
(Flashing)

A Bluetooth headset is in use.

Green
(Flashing
rapidly)

A landline call is being
received.

Amber
(On)

The Bluetooth headset is not
connected to the base unit.

Amber
(Flashing
rapidly)

The base unit is searching for
the registered Bluetooth
headset.

Red
(Flashing)

– The base unit is registering

a headset.

– Mute is turned on.

Light off

A Bluetooth headset is not
registered to the base unit.

For assistance, please visit http://www.panasonic.com/help

Getting Started

TG7731_41_(en-en)_1121_ver.021.p16 16

2011/11/21 12:02:12

Summary of Contents for KX-TGA470

























































































Search results

Summary of Contents for KX-TGA470

Reviews:

Related manuals for KX-TGA470

Brands by name

Popular brands

Panasonic KX-TGA470, Operating Instructions Manual

Search results

Summary of Contents for KX-TGA470

Reviews:

Related manuals for KX-TGA470

Brands by name

Popular brands