– 3 –
The handset display shows the instructions as shown
on the right.
1
Base unit:
Press HANDSET LOCATOR
(ALL)
until the
CHARGE indicator flashes.
2
Handset:
#
Press
á
.
$
Wait until a long beep sounds and the display
shows the registered number. The registration
will be then complete.
•
The registered number “
[1]
” to “
[3]
” is shown on the top right of
the display.
•
You can stop registration by pressing
(OFF)
on the handset and
pressing HANDSET LOCATOR
(ALL)
on the base unit.
•
After you register the handset to the base unit, please confirm that the other (first one and
second one) pre-registered handsets display “
Talk
” by pressing
. If one of the
handsets does not display “
Talk
”, re-register that handset to the base unit.
Ex. Extension number 3
Registration
!
This cordless handset must be registered at the KX-TG2352W/KX-TG2382B
base unit. The handset will be assigned the extension number at registration.
Only one handset can be registered at a time.
Make sure the base unit and the other handsets are not being used.
Registration must be completed within 1 minute.
á
•
The illustration of the base unit is the KX-TG2352W.
To cancel the handset registration, please see the KX-TG2352W/KX-TG2382B
Operating Instructions.
For assistance, please call: 1-800-211-PANA(7262)
CHARGE Indicator
Press [ALL] on
base for 3 sec,
then press [
H
].
Handset
Registering
Handset [3]
Registered
[3]
HANDSET LOCATOR
(ALL)
