Link to cell feature
To use this feature, you must first pair and connect
your cellular phones to the base unit (page 18).
Your cellular phones must have Bluetooth wireless
technology that is compatible with this product.
This feature allows you to:
– make or answer cellular calls using your home
phone (handset or base unit) with better
reception.
– maximize the benefits of cellular services (such
as free night and weekend calls, or cellular to
cellular call plans) by utilizing unused peak
minutes with your home phone.
– conserve the battery power of your cellular
phone while the unit is on a cellular call. (We
recommend charging your cellular phone during
the cellular call as your cellular phone battery is
being consumed.)
Important:
R
You may pair a maximum of 4 cellular phones
and 1 headset. However, the base unit allows
only one Bluetooth to be active at a time.
R
Locate your cellular phone near the base unit. If
the cellular phone is too close to the base unit
during a cellular call, you may hear noise. For
best performance, we recommend placing the
cellular phone between 0.6 m to 3 m (2 feet to
10 feet) away from the base unit.
Pairing a cellular phone
Program this setting using either the base unit or
one of the handsets.
Important:
R
For more details and the list of compatible
cellular phones, please visit our Web site:
http://www.panasonic.com/link2cell
R
Before pairing a Bluetooth enabled cellular
phone to the base unit, make sure that no other
Bluetooth device such as a Bluetooth headset is
connected to your cellular phone.
Handset / Base unit
1
For CELL 1:
M
MENU
N#6241
For CELL 2:
M
MENU
N#6242
For CELL 3:
M
MENU
N#6243
For CELL 4:
M
MENU
N#6244
R
After the corresponding CELL indicator on
the base unit starts flashing, the rest of the
procedure must be completed within 5
minutes.
2
Your cellular phone:
While the corresponding CELL indicator is
flashing, follow the instructions of your cellular
phone to enter the pairing mode.
R
Depending on your cellular phone, it may
ask you to enter the base unit PIN (default:
“
0000
”
).
3
Wait until a long beep sounds.
R
It may take more than 10 seconds to
complete pairing.
R
When the CELL indicator lights up, the
cellular phone is connected to the base unit.
You are ready to make cellular calls.
4
Proceed with the operation for your unit.
Handset:
M
OFF
N
Base unit:
M
EXIT
N
Note:
R
Make sure that your cellular phone is set to
connect to this product automatically. Refer to
your cellular phone’s operating instructions.
R
Make sure you cancel your cellular phone’s
current pairing if you want to pair it to the other
line (page 18).
Unpairing a cellular phone
You can cancel the pairing of a cellular phone that
is stored in the base unit.
Program this setting using either the base unit or
one of the handsets.
Handset / Base unit
1
For CELL 1:
M
MENU
N#6111
For CELL 2:
M
MENU
N#6112
For CELL 3:
M
MENU
N#6113
For CELL 4:
M
MENU
N#6114
2
MbN
:
“
Yes
”
a
M
SELECT
N
R
When the cellular phone is unpaired, the
CELL indicator is turned off.
3
Proceed with the operation for your unit.
Handset:
M
OFF
N
Base unit:
M
EXIT
N
18
For assistance, please visit http://shop.panasonic.com/support
Link to Cell
TG954x_OI(en)_0722_ver210.pdf 18
2015/07/22 12:24:44
