Main menu: “
Key detector
”
Sub-menu 1
Sub-menu 2
Settings
Code
Unit
Search
–
–
#655
–
Battery check
–
–
*1 For Line 1
*2 For Line 2
*3 If you program these settings using one of the units, you do not need to program the same item using
another unit.
*4 After the Bluetooth device is paired, the device name is displayed.
*5 For CELL 1
*6 For CELL 2
*7 For CELL 3
*8 For CELL 4
*9 This feature allows the unit to automatically adjust the date and time each time caller information
including date and time is received.
To turn this feature on, select
“
Caller ID auto
”
. To turn this feature off, select
“
Manual
”
. (Caller
ID subscribers only)
To use this feature, set the date and time first (page 16).
*10 The preset melodies in this product are used with permission of © 2007 Copyrights Vision Inc.
*11 If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone (tone 1 to 5). If
you select a melody, you cannot distinguish lines by their ringers.
*12 This tone lets you know when you receive an outside call while you are on another line or an
intercom call. If you select
“
On
”
, the tone sounds 2 times.
*13 This setting is available when you have the key detector (KX-TGA20). Read the installation guide for
more information on the key detector.
*14 For models with supplied key detectors, the display shows
“
1:Detector1
”
.
*15 If you register 2 or more key detectors.
*16 If you have 2 or more key detectors.
*17 This menu is not displayed when scrolling through the display menus. It is only available in direct
command code.
*18 You can set music play during the hold. The preset melody in this product is used with permission of
© 2006 Copyrights Vision Inc.
*19 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up the
handset to answer a call, turn off this feature.
*20 The flash time depends on your telephone exchange or host PBX. Contact your PBX supplier if
necessary. The setting should stay at
“
700 ms
”
unless pressing
M
FLASH
N
fails to pick up the
waiting call.
*21 Generally, the line mode setting should not be changed. If the LINE 1 indicator or LINE 2 indicator
does not light when another phone connected to the same line is in use, you need to change the line
mode to
“
A
”
.
Alarm
An alarm sounds at the set time for 3 minutes
once or daily. Alarm can be set for each handset.
Important:
R
Make sure the unit’s date and time setting is
correct (page 16).
Handset
1
M
MENU
N#720
2
MbN
: Select the desired alarm option.
a
M
SELECT
N
“
Off
”
Turns alarm off. Go to step 7.
“
Once
”
An alarm sounds once at the
set time.
For assistance, please visit http://shop.panasonic.com/support
43
Programming
TG954x_OI(en)_0722_ver210.pdf 43
2015/07/22 12:24:45