Panasonic KX-TG9391C Operating Instructions Manual Download Page 14

Page: 14 / 56

Preparation

Battery installation and
replacement

Important:

Use the supplied rechargeable batteries (Part
No. HHR-55AAABU).

When installing the batteries:
– Wipe the battery ends (

) with a dry

cloth.

– Avoid touching the battery ends (

) or the

unit contacts.

– Confirm correct polarities (

When replacing the batteries:
– USE ONLY rechargeable Ni-MH batteries

AAA (R03) size.

– Do NOT use Alkaline/Manganese/Ni-Cd

batteries.

– We recommend using the Panasonic

rechargeable batteries noted on page 3, 5.

Press the notch on the handset cover firmly,
and slide it in the direction of the arrow.

Insert the batteries negative (

) end first.

Close the handset cover.

Note:

When replacing batteries, remove the old
batteries.

Attention:

A nickel metal hydride battery that is recyclable
powers the product you have purchased.
Please call 1-800-8-BATTERY (1-800-822-8837)
for information on how to recycle this battery.

Battery charge

Place the handset on the charger for about 7
hours before initial use.

While charging,

“

Charging

”

is displayed and

the charge indicator on the handset lights up.
When the batteries are fully charged,

“

Charge

completed

”

is displayed.

Note:

It is normal for the handset to feel warm during
charging.

Rechargeable Ni-MH ONLY

TG9391C(e).book Page 14 Wednesday, August 27, 2008 2:36 PM

Summary of Contents for KX-TG9391C

























































Search results

Summary of Contents for KX-TG9391C

Reviews:

Related manuals for KX-TG9391C

Brands by name

Popular brands

Panasonic KX-TG9391C, Operating Instructions Manual

Search results

Summary of Contents for KX-TG9391C

Reviews:

Related manuals for KX-TG9391C

Brands by name

Popular brands