Useful Information
61
Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333
Noise is heard during a call.
L
You are using the handset or base unit in an area
with high electrical interference. Place the handset
and base unit away from interference sources, such
as antennas and mobile phones.
The handset/base unit stops
working while being used.
L
Disconnect the AC adaptor and turn off the
handset. Reconnect the AC adaptor, then turn on
the handset and try again.
Pressing
j
does not display/dial
the last number dialled.
L
The redialled number was more than 48 digits long.
Redial the number manually.
I cannot store a number from the
redial list into the phonebook.
L
The phone number is more than 24 digits long.
Phone numbers stored in the phonebook cannot be
more than 24 digits long (page 20).
Mute does not turn off after the line
is connected.
L
Press
{
C/
T
}
.
The handset beeps intermittently
and/or
/
flashes.
L
Fully charge the batteries (page 14).
I fully charged the batteries, but
/
still flashes.
L
Clean the charge contacts and charge again (page
14).
L
It is time to replace the batteries (page 13).
I fully charged the batteries, but the
operating time seems to be short.
L
Wipe the battery ends (
S
,
T
) and the unit contacts
with a dry cloth.
Caller information is not displayed.
L
You need to subscribe to Caller ID service. Consult
your service provider/telephone company for
details.
L
Your unit is connected to a telephone line with DSL
service. We recommend connecting a filter (contact
your DSL service provider) to the telephone line
between the base unit and the telephone line jack.
While viewing caller information,
the display returns to standby
mode.
L
Do not pause for over 1 minute while searching.
I cannot register a handset to a
base unit.
L
The maximum number of base units (4) are already
registered to the handset. Cancel unused base unit
registrations from the handset (page 51).
L
The maximum number of handsets (6) are already
registered to the base unit. Cancel unused handset
registrations from the base unit (page 51).
L
You entered the wrong PIN number. If you forget
your PIN, consult your nearest Panasonic service
centre.
L
Place the handset and the base unit away from
other electrical appliances.
Problem
Cause & solution
TG9120_40_50E(e).book Page 61 Wednesday, August 2, 2006 4:54 PM
