Question
Cause/solution
Why is the conversation
noisy or cutting off?
R
Try to relocate the base unit so that distance to the handset is
minimized.
R
If the same problem occurs even if the handset is next to the
base unit, please visit: http://shop.panasonic.com/support
Can I add another
accessory handset to my
base unit?
R
Yes, you can add up to 6 handsets (including the handset(s)
sold with your base unit) to a single base unit.
R
To purchase additional accessory handset(s) (KX-TGFA61),
please visit: http://shop.panasonic.com/support
TTY users (hearing or speech impaired users) can call
1-877-833-8855.
Can I keep the batteries
charging all the time?
R
You can leave the handset on the base unit or charger anytime.
This will not harm the batteries.
How can I answer a call
waiting call (2nd call)?
R
Press
M
FLASH
N
on the handset or
M
CALL WAIT
N
on the base
unit when you hear the call waiting tone.
I want to setup the
answering system or help
recording the outgoing
greeting message.
R
Turn on the answering system (page 16).
R
If you have unit’s answering system set to on and also the
voicemail enabled, the system with least amount of rings will
record the message first. Contact your phone service provider
or change the unit’s answering system number of rings settings
to a lower value using the following method.
Handset:
1.
M
MENU
N#211
2.
MbN
: Select the desired setting.
a
M
SAVE
N
a
M
OFF
N
R
To record an outgoing greeting message for your answering
system, see page 12.
I want to setup the
voicemail service or help
accessing messages.
R
Voicemail service (provided by phone service provider) can
record calls when you are on another call or if your answering
system is off (page 16).
R
Your phone service provider should provide you with an access
number and password to retrieve your voicemail messages.
“
Voicemail msg. via
phone co.
”
is shown
on the handset display or
Voicemail msg.
is
shown on the base unit
display and interrupted or
busy dial tone is heard
after pressing
M
N
on
the handset or
MZN
on
the base unit. How do I
clear the voicemail notice
and busy dial tone?
R
Your phone service provider’s voicemail service (not the unit’s
answering system) has recorded a message for you. Typically
you can clear the voicemail notice and busy (stutter) dial tone
by listening to the message. To listen to the voicemail message,
dial the voicemail access number provided by your phone
service provider, and follow the voice instructions. Depending
on your phone service provider, you may need to remove all
messages from your voice mailbox to clear the notification.
R
You can remove this notification manually by pressing and
holding
#
until the unit beeps.
For assistance, please visit http://shop.panasonic.com/support
19
Useful Information
