Programming
36
2
{
r
}
: Select the handset you want to
cancel.
s
M
3
{
r
}
:
“
Yes
”
s
M
L
A confirmation tone sounds.
L
The handset does not beep when
cancelling its own registration.
4
{i
c
}
Cancelling a base unit
A handset can cancel a base unit that it
is registered to. This allows the base unit
to end its wireless connection with the
system.
1
1
(middle soft key)
y
139
2
{
r
}
: Select the base unit you want to
cancel.
s
M
3
{
r
}
:
“
Yes
”
s
M
s
{i
c
}
Note:
L
To register a handset to another base
unit or to the same base unit again,
see page 35.
Increasing the range of the
base unit
You can increase the signal range of the
base unit by using a DECT repeater.
Please use only the Panasonic DECT
repeater noted on page 3. Contact your
Panasonic dealer for details.
Important:
L
Before registering the repeater to this
base unit, you must turn the repeater
mode on.
L
Do not use more than one repeater at
a time.
Setting the repeater mode
1
1
(middle soft key)
y
138
2
{
r
}
: Select the desired setting.
s
M
s
{i
c
}
Note:
L
After turning the repeater mode on or
off,
_
is displayed on the handset
momentarily. This is normal and the
handset can be used once
w
is
displayed.
Registering the DECT repeater (KX-
A405) to the base unit
Note:
L
Please use a repeater that has not yet
been registered to another unit. If the
repeater is registered to another unit,
deregister it first, referring to the
Installation Guide for the DECT
repeater.
1
Base unit:
Press and hold
{x}
for about 5
seconds. (No registration tone)
L
The next step must be completed
within 90 seconds.
2
DECT repeater:
Connect the AC adaptor, then wait
until the
&
indicator and
w
indicator light green.
3
Base unit:
To exit the registration mode, press
{x}
.
TG8611FX(e-e).book Page 36 Friday, June 3, 2011 11:23 AM
