Panasonic KX-TG8421EB Service Manual Download Page 35

Page: 35 / 110

KX-TG8421E/KX-TG8422E/KX-TG8423E/KX-TG8424E/KX-TGA840E

8.3.

How to Clear User Setting

Units are reset to the Factory settings by this operation (Erase recorded Voice messages*, stored Phone numbers, Caller list
and etc.)

Note:

• Some menus are not reset. Refer to

Operating Instructions

(P.19).

• The reset menus differ depending on the following operations.
•

This operation should not be performed for a usual repair.

* KX-TG8421/KX-TG8422/KX-TG8423/KX-TG8424 only

8.3.1.

Resetting both base unit and handset

Both the base unit and the registered handset which you did the following steps

are reset. Other registered handsets

will not be reset.

Note:

(*1) Refer to

Registering a Handset to a Base Unit

(P.22).

8.3.2.

Resetting only handset

The only handset is reset by doing the following steps

Note:

(*2)

• The handset registration to the base unit is cancelled.
• If the handset needs to be registered to the base unit, refer to

Registering a Handset to a Base Unit

(P.22).

• If users do not bring the base unit with them, the registration procedure has to be done by users themselves.

Summary of Contents for KX-TG8421EB















































































































Search results

Summary of Contents for KX-TG8421EB

Reviews:

Related manuals for KX-TG8421EB

Brands by name

Popular brands

Panasonic KX-TG8421EB, Service Manual

Search results

Summary of Contents for KX-TG8421EB

Reviews:

Related manuals for KX-TG8421EB

Brands by name

Popular brands