Panasonic KX-TG8421E Quick Manual Download Page 5

– 5 –

Phonebook (Handset)

Making calls

1

n

 (left soft key) 

2

{V}

/

{^}

: Select the desired entry.

L

You can scroll through the phonebook entry by 
pushing and holding the joystick down or up.

3

{C}

Answering system (Base unit)

Answering on/off

Press 

{

s

}

 to turn on/off the answering system.

Listening to messages

{

6

}

Frequently asked questions

Question

Cause/solution

Why is 

w

 flashing?

L

The handset is too far from the base unit. Move 
closer.

L

The base unit’s AC adaptor is not properly 
connected. Reconnect AC adaptor to the base 
unit.

L

You are using the handset or base unit in an area 
with high electrical interference. Re-position the 
base unit and use the handset away from sources 
of interference.

L

The handset is not registered to the base unit. 
Register it (page 8).

Why is the handset display 
blank or dark?

L

The handset is in screen saver mode. Activate the 
handset display again by:
– pushing the joystick left 

{

<

}

 or right 

{

>

}

 when 

on a call.

– pressing 

{ih}

 at all other times.

L

LCD in charging

 is set to 

Off

 while on 

charge. Change the setting.

What should I do when the 
handset does not turn on?

L

Make sure the batteries are installed correctly. 

L

Fully charge the batteries.

L

Clean the charge contacts and charge again.

Basic operations

TG8421E(e)_QG.fm  Page 5  Wednesday, December 24, 2008  2:14 PM

Summary of Contents for KX-TG8421E











Reviews: