*8 If you do not want the unit to ring before the caller information is received, set to
“
Off
”
.
(Caller ID subscribers only)
You can only remove the first ring if the unit rings two times or more by default, which
depends on your service provider/telephone company.
*9 This feature allows the unit to automatically adjust the date and time each time caller
information including date and time is received.
To turn this feature on, select
“
Caller ID
”
. To turn this feature off, select
“
Manual
”
.
(Caller ID subscribers only)
To use this feature, set the date and time first (page 15).
*10 You can set the wallpaper to display with or without date and time by pressing
. The
default setting is with date and time displayed.
*11 You can set the handset display backlight while on charge.
–
“
On
”
: Backlight is on (dimmed).
–
“
Off
”
: Backlight turns off after 10 seconds of charging.
*12 Turn this feature off if you prefer not to hear key tones while you are dialling or pressing any
keys, including confirmation tones and error tones.
*13 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up
the handset to answer a call, turn off this feature.
*14 The recall/flash time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary.
*15 The default setting will be as follows if you select the following regional codes when
changing the unit’s region setting (page 34):
“
Česká rep.
”
=
“
100 msec.
”
“
Slovensko
”
=
“
100 msec.
”
*16 To prevent other users from joining your conversations with outside callers, turn this feature
on.
*17 KX-TG8151 series: page 3
Special programming
Alarm
An alarm sounds at the set time for 1 minute
and is repeated 5 times at 5 minute intervals
(snooze function). A text memo can also be
displayed for the alarm. A total of 5 separate
alarm times can be programmed for each
handset. You can set one of 3 different alarm
options (once, daily, or weekly) for each alarm
time.
Important:
R
Set the date and time beforehand
(page 15).
1
(middle soft key)
#720
2
Select an alarm by pressing
1
to
5
.
a
3
MbN
: Select the desired alarm option.
a
“
Off
”
Turns alarm off. Go to step 9.
“
Once
”
An alarm sounds once at the set time.
“
Daily
”
An alarm sounds daily at the set time.
Go to step 5.
“
Weekly
”
Alarm sounds weekly at the set time(s).
4
Proceed with the operation according to
your selection in step 3.
n
Once:
Enter the desired date and month.
a
31
Programming
TG8151_61FX(en)_0323_ver011.pdf 31
2012/03/23 16:35:21