Preparation
9
Connections
When connecting the AC adaptor to the
base unit, a short beep will be heard. If it is
not heard, check the connections.
Note:
L
Never install telephone wiring during a
lightning storm.
L
The AC adaptor must remain connected
at all times. (It is normal for the adaptor to
feel warm during use.)
L
The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight
of the adaptor may cause it to become
disconnected.
Location
L
For maximum distance and noise-free
operation, place your base unit:
– away from electrical appliances such as
TVs, radios, personal computers or
other phones.
– in a convenient, high and central
location.
Battery
installation/replacement
Important:
L
Use only the included rechargeable
batteries noted on page 4, 5.
L
When replacing batteries, we recommend
using the Panasonic rechargeable
batteries noted on page 4, 5.
1
Press the notch on the handset cover
firmly and slide it in the direction of the
arrow.
L
When replacing batteries, remove the
old batteries positive (
S
) terminal first.
2
Insert the batteries negative (
T
)
terminal first. Close the handset cover.
Battery charge
Place the handset on the base unit for
about 7 hours before initial use.
When charging,
i
and battery strength
icon are alternately shown on the display.
When the batteries are fully charged,
1
remains on the display.
L
The charge indicator lights up when the
handset is placed on the base unit.
Use only the included AC adaptor
and telephone line cord.
Hook
(220
–
240 V, 50 Hz)
To telephone
network
TG8100-8120FX(e).book Page 9 Wednesday, August 9, 2006 3:13 PM
