– 6 –
What is a PIN?
L
The PIN is a 4-digit number that must be entered in order
to change certain base unit settings. The default PIN is
“
0000
”
.
What do I need to do to display caller
information?
L
You need to subscribe to Caller ID service. Consult your
service provider/telephone company for details.
Registering a handset to a base unit
The supplied handset and base unit are pre-registered. If for some reason the handset is not
registered to the base unit, register the handset.
1
Press and hold
{x}
on the base unit for
about 5 seconds until a beep is heard.
L
If all registered handsets start ringing,
press
{x}
to stop, then repeat this step.
L
After a beep is heard, the rest of this
procedure must be completed within 1
minute.
2
{
MENU
}
(right soft key)
i
r
i
{
OK
}
3
{^}
/
{V}
:
“
Registration
”
i
{
OK
}
4
{^}
/
{V}
:
“
Register Handset
”
i
{
OK
}
5
{^}
/
{V}
: Select a base unit number.
i
{
OK
}
6
“
Enter PIN
”
is displayed. Enter the base
unit PIN (default:
“
0000
”
).
i
{
OK
}
Frequently asked questions
Question
Cause & solution
{x}
{x}
KX-TG8070
KX-TG8090/KX-TG8092/
KX-TG8093
{
MENU
}
/
{
OK
}
{
OK
}
TG8070_TG8090E(e)_QG.fm Page 6 Wednesday, May 30, 2007 11:23 AM
