Panasonic KX-TG8021BXS Service Manual Download Page 76

Page: 76 / 101

KX-TG8021BXS/KX-TG8021BXT/KX-TGA800BXS/KX-TGA800BXT

13 Schematic Diagram

13.1. For Schematic Diagram

13.1.1. Base Unit (Schematic Diagram (Base Unit_Main))

Notes:

1. DC voltage measurements are taken with voltmeter from the negative voltage line.

2. The schematic diagrams may be modified at any time with the development of new technology.

13.1.2. Handset (Schematic Diagram (Handset))

Notes:

1. DC voltage measurements are taken with an oscilloscope or a tester with a ground.
2. The schematic diagram may be modified at any time with the development of new technology.

13.1.3. Charger Unit (Schematic Diagram (Charger Unit))

Notes:

1. DC voltage measurements are taken with voltmeter from the negative voltage line.

2. The schematic diagram may be modified at any time with the development of new technology.

Summary of Contents for KX-TG8021BXS






































































































Search results

Summary of Contents for KX-TG8021BXS

Reviews:

Related manuals for KX-TG8021BXS

Brands by name

Popular brands

Panasonic KX-TG8021BXS, Service Manual

Search results

Summary of Contents for KX-TG8021BXS

Reviews:

Related manuals for KX-TG8021BXS

Brands by name

Popular brands