Panasonic KX-TG7875S, Operating Instructions Manual

Page: 19 / 96

intervals when it returns within base unit
range. You can set the interval. The default
setting is
“
1 min
” .
Important:
R When you are using a cellular line or a
Bluetooth headset, the base unit loses its
connection from other Bluetooth devices
(cellular phone or headset). To
automatically resume the connection to
cellular phones, leave the auto connection
on.
R Some cellular phones lose connection after
usage, please check the specifications of
your cellular phone for more details.
Handset
1
M MENU N#632
2
MbN : Select the desired setting.
3
M SAVE N a M OFF N
Note:
R Some cellular phones may ask you if you
accept the connection requirement from the
base unit. In that case, select
“
Off
” in step
2. Check the specifications of your cellular
phone.
Connecting/disconnecting the
cellular phone manually
If you will not be using the paired cellular
phone’s link to cell feature temporarily (for
example, you do not want the unit to ring
when your cellular line receives a call), you
can disconnect your cellular phone from the
base unit. If you want to use it again,
reconnect the cellular phone to the base unit.
Note:
R Even if a paired cellular phone was
disconnected from the base unit, if it is
brought within the base unit’s range during
the auto connection interval, it may
automatically connect to the base unit
(page 18).
R A disconnected cellular phone is not
“
Unpair
” from the base unit, so pairing it
to the base unit again is unnecessary.
Handset
1
To connect/disconnect:
For CELL 1: M MENU N#6251
For CELL 2: M MENU N#6252
R A long beep sounds.
2
M OFF N
Cellular line only mode (If you do
not use the landline)
If you do not use the landline, we recommend
setting the unit to the cellular line only mode.
Important:
R If you turn on the “
Cell line only
mode
” , disconnect the telephone line cord
from the base unit. Otherwise the “
Cell
line only mode
” cannot be activated.
Handset
1
M MENU N#157
2
To turn on:
MbN : “
On
” a M SELECT N a
MbN : “
Yes
” a M SELECT N
To turn off:
MbN : “
Off
” a M SELECT N
Note:
R Once you set this mode, you can use the
following buttons to make cellular calls:
– for the handset, press
M N or MZN
instead of M CELL N (page 21).
– for the base unit, press MZN instead of
the line button ( M CELL 1 N or M CELL 2 N )
set for the cellular line selection
(page 20, 28).
R Once you set this mode, the following
features cannot be used:
– Landline features (page 43)
– Answering system (page 56)
Messages cannot be received.
– Voice mail features (page 63)
R After this mode is turned on or off, the base
unit reboots.
– Bluetooth connections from cellular
phones or headset are disconnected. If
the auto connection is turned on
(page 18), the cellular phones are
reconnected.
For assistance, please visit http://www.panasonic.com/help
19
Link to Cell
TG78xx(en)_1210_ver101.pdf 19 2012/12/10 21:19:26